Home > Products > Nylon Products > Factory supplier MC nylon rod hard rubber rod
Factory supplier MC nylon rod hard rubber rod
- Shanghai
- T/T Credit Card
You May Like
Product Details
| Place of Origin | Jiangsu, China | Brand Name | HongBao | |
| Model Number | Customized |
Product Description
Factory supplier MC nylon rod hard rubber rod
MC Nylon Rod (PA6) also named Monomer Casting Nylon is a engineering plastic rod which is widely usded in all industrial area . It’s light,high strength,wear-resisting,insulating and so on. So it is mainly used as gears and parts,chemical machinery,electric parts,automobile parts,chemical equipment,etc…
| Category | Performance | Units (conditions) | Numerical | ||
| Physical Performance | Density | g/cm3 | 1.14~1.16 | ||
| Water Absorption | % | 0.9 | |||
| Thermal Performance | Martin Heat Resistance | ℃ | 67~74 | ||
| Highest temperature | ℃ | 120 | |||
| Minimum temperature | ℃ | -40 | |||
| Distortion Temperature | ℃ | 120 | |||
| Heat Conductivity Coefficient | w/m .℃ | 0.28~0.29 | |||
| Coefficient of linear expansion | 10-5/℃ | 4~7 | |||
| Combustibility | self-extinguish | ||||
| Mechanical Performance | Tensile Strength | Mpa > | 75 | ||
| Elastic Tensile modulus | 104Mpa | 0.392(40000) | |||
| Compressive Strength | Mpa > | 100 | |||
| Bending strength | Mpa > | 140 | |||
| The impact strength (no gap) | KJ/m2 > | 510 | |||
| Elongation | % | 20 | |||
| Hardness | HPM(*) > | 80~90 | |||
| Fatigue Strength | 107kg/cm2 | 200 | |||
| Friction Coefficient | oil-free lubrication | 0.09~0.3 | |||
Advantages
1. High strength and stiffness
2. High impact and notch impact strength
3. High heat deflection temperature
4. Good at dampening
5. Good abrasion resistance
6. Low coefficient of friction
7. Good chemical stability against organic solvents and fuels
8. Excellent electrical properties, ease of printing and dyeing
9. Food safe, noise reduction
30 Years of production experience
Established in 1986, Jiangsu Hongfa specializes in researching, developing and manufacturing different kinds of Special Casting Nylon and composite reinforced nylon.
Various kinds of products
The company can provide steel frame reinforced nylon pipe, MC nylon pipe, nylon gear, nylon bushing, nylon pulley, nylon machine tool shield and etc.
Comprehensive quality management system
The company approved by GB/T 19001-ISO9001.2000, and has the professional QC team which can control the raw material purchase, products production, and after service.
Welcome to contact
Jeff
TEL:86-515-88667811
FAX:86-515-88667811
Mobile:+8618552467980
Skype :jeff9212282
Contact Us
- Jiangsu Hongfa Engineering Nylon Co., Ltd.
- Contact namesophia chen Chat Now
- Phone86-515-88667811
- Address18th wenhua Road, Yancheng, Jiangsu
Product Categories
| MC Nylon Pipe | New Products | Nylon Gear | Nylon Products |
| Nylon pulley ,nylon sheave | nylon rod | nylon sheet | Nylon-Steel Composite Pipe |
| Pipe Fittings | Steel Frame Reinforced Nylon Pipe |
New Products
-
China supplier nylon rod stock nylon round bar
-
MC nylon rod solid plastic rods
-
MC Nylon block
-
MC nylon rod sounding rod
-
MC nylon rod pa6 round bar
-
mc nylon rod plastic thin rod
-
MC nylon rod blue mc nylon rod
-
Professional manufacture nylon cutting board nylon printing plate
-
MC nylon board chopping board
-
Nylon elevator wheel
-
blue mc nylon rod pa6 bar
-
MC nylon board decorative board
Popular Searches
- printer consumable
- 3d Printer Filament
- Hdpe Cutting Board
- printer consumables
- 3d filament
- Plastic Rods
- ptfe rod
- teflon rod
- nylon rod
- teflon sheet
- ptfe bar
- Plastic Welding Rod
- Acrylic Rod
- Peek Rod
- Pvc Rod
- Hdpe Rod
- Pom Rod
- Pvc Plastic Rod
- cast acrylic
- Ptfe Tube
- Ptfe Tubing
- Ptfe Pipe
- Pvc Welding Rod
- abs 1.75mm
- pla 1.75mm
- abs filament
- plastic welding rods
- abs plastic filament
- 3d printer filament pla
- pc filament
Recommended Products
- 0.25inch,0.5inch,0.75inch,1inch size hdpe polyethylene plastic board and sheet
- wear resist pehd pe300 pe500 plastic board
- uv resistant natural color PE300 PE500 plastic sheet cut to size
- HDPE PE300 UHMWPE Black Sheet Thickness Suppliers White Hard Plastic Board UHMW Plastic Material Sheet
- 1/2inch,1inch thick 10mm thick hdpe polyethylene plastic sheet
- Uhmw polyethylene 10mm Plastic Sheet Ultra High Molecular Weight Polyethylene Sheets
- 0.5inch 1 inch thick upe polyethylene plastic panel
- 10mm thick hdpe polyethylene plastic board
- Custom processing of plastic rods. We have uA rods in their natural colors, available in yellow and white nylon materials.
- PA Nylon Rod white black 3 mm - 200 mm PA6 Nylon Rod
- PP plastic rod, nylon rod, white, transparent, highly tough, solid round rod
- PA Nylon Rod white black 3 mm - 200 mm PA6 Nylon Rod
Find Similar Products By Category
- Chemicals > Plastic Products > Plastic Rod
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sophia chen
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile