IEC High Precision Good Quality Creepage Distance Test Gauge

standard packing

IEC High Precision Good Quality Creepage Distance Test Gauge

Key words: metal feeler gauge, measuring & gauging tools,  reepage ruler, Creepage caliper

1.Basic introduction

• For gauging  the creepage and clearance distances in dead state between parts under voltage in the operating conditions as well as between touchable metal pieces and parts under voltage in the operating conditions. e. g. in installation material, switchgears, plugs, socket-outlets and electric appliances
  according to IEC and CEE Publications,EN Standards,VDE Specifications.
• It is used to determine the shortest path between two conductive parts, or between a conductive part and the bounding surface of the equipment, measured along the surface of the insulation, with specifications made according to the requirements.
• Creepage distance test card or feeler gauge is made of whole stainless steel.

2.Dimensions:

• CX-PD10	1.0/2.0/2.5/2.8/3.2/3.6/4.0/5.0/5.6/6.3mm
  CX-PD30	1/1.05/1.1/1.2/1.25/1.3/1.4/1.5/1.6/1.7/1.8/1.9/2.0/2.1/2.2/2.4/2.5/2.8/3.2/ 3.6/4.0/4.2/4.5/5.0/5.6/6.3/7.1/8.0/9.0/10mm
  Standards	IEC60598 IEC60335 IEC60601 IEC60065 UL
  Customized size are offered.

   

•   Creepage Distance Gauges for gauging the creepage and clearance distances in dead state between parts under voltage in the operating conditions as well as between touchable metal pieces and parts under voltage in the operating conditions e. g. in installation material, switchgears, plugs, socket-outlets and electric appliances
  according to IEC and CEE Publications,EN Standards,VDE Specification

• Picture of CX-PD10

• 

•  

• CX-PD30

•