Iec61032 Iec60065 Ip2x Test Finger Probe B Iec Test Finger

standard packing, silver box

Iec61032 Iec60065 Ip2x Test Finger Probe B Iec Test Finger

Key words:  Test Probe B, Test Finger probe , Test probe ,IP2X Probe, Jointed Finger Probe

This Jointed Test Finger Probe is intended to verify the basic protection against access to hazardous parts. It's also used to verify the protection against access with a finger.

Application:

 1,The joint part of The Standard Test Knurled Finger Probe can't touch the live parts or close to the dangerous parts, and 50 mm to 20 mm baffle plate cannot enter.

 2, In the prevent electric shock test, wires , power devices, and lighting devices are needed.

 3, Both joints shall permit movement in the same plane and the same direction through an angle of 90° with a 0° to +10° tolerance

Conforms to:

This is the "international" IP2X  test probe required by most IEC, EN and CSA standards, in addition to many UL standards. The Jointed Finger Test is a high-precision probe built in exact accordance with IEC standards such as IEC 60950, IEC 61010, and IEC 61032 and is also used for CSA and UL standards.

Notes:

Both joints shall permit movement in the same plane and the same direction through an angle of 90^o with a 0^o to +10^o tolerance.

Technical Parameters: