Induction Coil

Specifications

electromagnetic heater, and other heating elements, e.g. ceramic heater, cast aluminum heater, mica heater, etc.
1. Cr20Ni80 resistance wire
2. HIgh watt density
3. ISO9001, CE and RoHS certified
4. Various sizes to your needs

The operation temperature can reach up to 450 degree. It has advantages such as high heat retention, long lifetime. It is widely used in plastic extrusion, chemical fibre, blowing moulding machines.

1. Saving production cost

It can save 30% to 80% energy compared with traditional resistance heaters. Plus, it can save the energy used to cool down work environment.

2. Improving plastic product quality

It can better control the temperature. The heating on barrel surface is more even. The cooling is faster if with air coolers. Thus, the quality of melted plastic granules is improved.

3. Increasing plastic product quantity

It has faster heat response. The pre-heating time is shortened by 1/3. Thus the production rate is increased. 

4. Improving work environment

It produces less heat dissipation, and thus leads to a lower temperature on the heater sheath. So the heater cover is touchable, unlike traditional heaters. In addition, it discharges less noise pollution and no dust at all. 

5. Lengthening usage life

As the heaters are running under only 100°C, the frequency of changing heaters is lower. In addition, the usage lives of barrels and screws are also longer.

6. Higher safety

The failure rate is lower due to highly automated module control. Heater covers are touchable. And there is no currency leakage.

7. Easy installation and operation

The V-type structure of the heater helps simplify and quicken the installation of induction heaters. The automated module control allows easy operation of the heaters.

8. Easy maintenance

It uses multiple control units. So in case of malfunctioning, the plastic machines can keep running by only changing the problematic control board.