Contant or Flash Solar Garden Lights

Specifications

Contant or Flash Solar Garden Lights

Specifications:

Power                              0.3W

Power Supply                  solar cell (monocrystal silicon) 2.5V80mA

Battery                             600MA Ni-Hm High temperature Battery

Shell                                aluminum alloy

Working Hours                 continuously light 72 hours after exposed under strong sunlight for 8 hours.

Lighting Status                 flash (2Hz±20%) or constant light

Light Color                       red, yellow, blue, white, green

Lighting Component         6 pcs φ5 high bright anti-fog LED on each side

Life Span                         >3years

Working Temperature        -20°C~+70°C

Activate Condition            light intensity <500Lux

Size                                 110*95*25mm

Max Load Capacity          static pressure capability>10 ton

Net Weight                       34KG/carton 

Gross Weight                   35KG/carton

Package Size                   48*40*35CM 100PCS/carton

Installation                       double fix the stud with adhesive and screw, make sure it will not loose under long term pressure.

FEATURES:

1. The road stud is produced by mould in one punch, no need to assemble, which greatly improve its load capability. Solar battery, electronic component and LED indicators are sealed in road stud with special technique, the road stud is strictly water proof, which can be used on ponding road for the long run.

2.   Upside of the road stud is designed with embossed parallel stiffeners which strengthen the stud and protect solar panel from being crushed by the wheels.

3.   Additional wear-resisting layer is increased on the upper surface, which prevents the surface from being wear away, and improve the efficiency of solar energy transfer.

4.   Intelligent control IC, imported precision potentiometer, heat-resistant high-volume rechargeable batteries are applied in the road stud, which ensure its service life and excellent performance.

5.   LED indicators are mounted in one side or double side according to customers’ requirement.

6.   The road stud is designed with handgrips and screw holes on both sides, which can be installed firmly on the road.

7.   Easy to install.

8.   The road stud is applicable to pavement, roadside edge, kerb stone, port and so on.