2014 New Led Module,waterproof 5630 Led Module With 2700k 3500k 4500k 6000k 7500k

Specifications

SAMSUNG 5630 led module :

specification :

1. Injection Module adopts ABS material as its shell.

    There is transparent epoxy resin around the lights with good insulativity.

2. Comprehensive performance is good with excellent electrical performance, impact strength and wear       resistance, chemical resistance, moisturecontent , shaping and excellent machining technology.

3. It is completed through injection in one time. It solves the problem that nonuniform sealing, dirty shell and  LED stand out of the glue etc. It is simple artwork with good appearance and short lead time as well.

4. It has good cold resistant available for -20~40°C. There are 3M adhesivetape and screws for customers to fix it in easy installation.

5. It is widely used for emitting letters, advertisement, indoor decoration ,partial lighting, etc

Dimension:

LED module picture:

Warning:

1.Please do not connect power supply when the light is still in box.

2.Please do not connect high voltage before the installation, and make sure that the fixture connect

the earth.

3.Change the protection cover completely if it was broken.

4.Pay attention to anti-fire, anti-electricity and anti-shake.

Notice:

Caustic or dissolvent chemicals may damage the protection crust.

Normal working temperature : -35°C-40°C, if overrun the range, it will effect the lifespan of lamp. Storage temperature is -25~60°C

Common failures and solutions:

1. If the lamp can not light up, please check whether it connects power supply well and whether the switch is on.

2. If the lamps frequently turn on and off, please check whether the connection between power and lamp is fixed enough.

Note: Please contact with technicians in case of above solutions don’t work.

Attention:

1. Please do not use rough or cleanser to wipe this products, do not use high press water to wash this product that it would be harmful for the waterproof components.

2. Please do not use sharp conents to stab this products, or it does harm for internal components.

3. Please do not force the products

4. After reaching the lifespan please contact your local relative authority or retailer to ask for recycle suggestion.

5. Recommended working environment temperature is -20~40°C

6. Please do not working if the fixture or wire damage, please check it regular

7.Should be installed by professionals

Certificate: