GPON HGU 4lans+2pots+wifi HG8245 F660

Introduction

GPON ONT/HGU is designed for FTTH and networking service providers. FHR2421K is developed by FH-net optoelectronics based on the Gigabit GPON technology, has a high cost performance, it supports the 802.11n wireless networking technology(T/R), support 2 layer, 3 layer or more layer VoIP. It is high stability and easy to maintain, has multi-service QoS quality guarantee. And It is fully compliant with technical regulations such as ITU-T G.984.x and technical requirement of GPON Equipment (V2.1 and above version) from China Telecom, China Unicom.    

Characteristics

1.  Main service: 1GE+3FE+2VOIP+1WIFI
2.  Plug and play, integrate auto detection, auto configuration and auto firmware upgrading
3.  Integrate OMCI and TR-069 remote configuration and maintenance
4. Support flexible QinQ VLAN,DHCP server/relay and IGMP/ MLD multicast monitoring function
5. Support diagnostic monitoring and remote disabling of fiber optical
6. Compatible with Huawei,ZTE and Fiberhome OLT
7. Support 802.11n WiFi(T/R)function
8. Support NAT and firewall function
9. Support IPv4 and IPv6 dual stack
10. POTS integrated circuit test complies GR-909
11. WAN support networking bridge, router and bridge/router mixed mode

Specification

Data Service Functions

1.    Full speed 1G non-blocking switching
2.    2048 MAC address table
3.    16 LAN
4.   Support VLAN QinQ, transparent, tag, translation, trunk, etc.
5.    Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc
6.    Support auto polarity detection of Ethernet ports (AUTO MDIX)
7.    Integrated IEEE802.1p QoS with four level priority queues
8.    Support IPv4 IGMP snooping and IPv6 MLD snooping
9.   Support bridging, router and bridging/router mixed mode

POTS service function

1.  support SIP voice protocol
2.  support H.248 voice protocol
3. SIP protocol: ISP provide the port number of the main SIP proxy server and terminal VOIP
4. Value range is 1-65535, system default value is 5060
5. H.248 protocol: ISP provide port number of the spare MGC server and VOIP terminal
6.  Value range is 1-65535, system default value is 2944
7. Port ringing current voltage: 50±10VAC,30±10H
8. Port type POTS(VOIP)
9. Support G.711 A-Law/u-Law,G729A/B,G.723.1-5.3/6.3,G.726.etc.voice coding/compressed technology
10. Support auto switch in main interface and standby interface by the software

Wi-Fi service

1.  Support Integrated 802.11b/g/n, 300Mbps
2.  Support 64 connections
3.  Support WEP and WPA/WPA2 security protocols.

Application chart

Ordering Information

Choosing Phyhome, Choosing Professional!

 Any questions or advice, please do contact us: skype: fhnet001