Haemangioma Treatment Terminator Laser Tattoo Removal 1-10Hz Freckle Removal Machine 1064nm

Applications:

1.Tattoo (black, red, brown, blue, tec)

2.Pigmented lesions: sunspot, Ota's nevus, Ito’s nevus, Mongolian spot, age spot, CALMS, nevus ,Zygomatices etc. 

3.Skin Rejuvenation and resurfacing fine wrinkles and expression lines removal , pigmentations reduction such as sunspots 

and freckles firms up skin tone 

Advantages:

1. Portable with keyboard screen .

2.Multi-spot size is ideal for a wide variety of treatment parameters

3. The effect is 12 times more than that of the common laser machines;

4. Single pulse width is 6ns, 1/4 that of common laser machines;

5. It not only enhances the effect of thrashing the pigmentation, but also avoids the blain and scar after laser treatment.

6. Dual-wavelength (1064nm&532nm) output.

Pigmentation killer

Model: T-ONE

Anything is possible!

Technical theory

The so-called single transverse mode means that there is only one mode of the laser beam output on the transverse section of the laser. It has good balance, a small divergence angle, and good coherence. Even if with the use of KDP, it is also difficult for the electro-optical Q technology to do like this. It has a great relationship with the entire design of the laser resonator. The front cavity sheet our company uses is Gaussian mode. It is a very symmetrical Gaussian distribution, and the rear cavity sheet is the concave total reflection mirror. As if plus a light bar mode selection between the first reflector cavity and the laser rod, and it filters the uneven distribution of spurious mode, so that only the middle of the main oscillation mode participates in the resonant. In the rear cavity, it is a concave mirror which is inward contraction, to shrink inward oscillation of photons, resulting in a higher energy output.

Treatment theory

With the principle of the selective light pyrolysis, the Terminator T – ONE uses the Nd.YAG as the working material. Combined with the most advanced photoelectric Q switching technology, it can release the laser energy within a very short time (nanosecond), which forming a "giant pulse" to “explode” the pathological pigment tissue into many tiny broken particles.. These tiny broken particles will be absorbed by the phagocyte. Then the lymphatic will take away the tiny broken particles from the body. The pigment gradually becomes weak and finally disappears, which achieves the goal of the treatment.

Single transverse mode output type

Features: It is the so called “flat cap mode” output type, which has well-distributed light spot output and smaller skin traumas.

Common output type

Disadvantages: uneven distributed light spot, point of strength with different depths, poor effect, and big pain.

Applications

1. Dispelling the dermis lesion with pigment like the nevus of ota, and the brown blue nevus.

2. Dispelling the pigmentary lesions on the epidermis. Such as the freckle, the café-au-lait spots, and age pigments.

3. Real gauss light spot distribution, flat cap type light spot output technology, it is better for the chloasma treatment

4. Skin rejuvenation, shrink the pores

5. Dispel the tattoo

System features

1. The equipment is stable, low failure rate with a built-in energy correction system and stable and intensive energy output

2. It is designed according to the human engineering which is easy to learn and be operated

3. Light guide arm with 7 joints, which is easy to be operated, and people can do whatever they want without limitation

4. More optional parameters combine the parameters according to the diseased tissue freely.

5. No medical supplies, low cost

Technical parameters

laser wave length                       1064nm;532nm

Medium of laser                          YAG

Focus spot diameter                  Φ1mm

max energy                                1064nm: 800±150mj

532nm: 250mj±50mj

Rep. Rate                                  1064nm:1-10Hz

                                                 532nm: 1-3 Hz

Product Description

Q-switched laser pulse width    7ns±3ns

Laser type                                single transverse mode

Aiming beam                            632.8nm red light

Light guide mode:                    7 articular arm

Control mode                           LCD, Micro-computer control, single use, total use counting system

Cooling system                        built-in closed circulating water cooling system

Protection system                   water-break protection system, overload protection system

Working temperature               5°C~40°C

Working humidity                    no more than 80%

Power supply                          AC 220V±22V,50Hz±1Hz

Power consumption               no more than 2.5Kva

Dimension                             750 mm×840 mm×405 mm

Weight                                    55kg

Main Product

Certificate for Medical and Beauty industry

Company

Our Advantages

How it Works? 

If you’re worried about lengthy sessions with a laser, don’t be. Q switched laser with very short pulse durations 3ns, which help keep skin free of scarring. To further protect the skin, treatments are usually done over several sessions. The number of sessions you need will depend on your tattoo. Every tattoo is different and they come in all shapes, sizes and colors, meaning some tattoos are easier to remove than others. Professional tattoos (one you get at a tattoo parlour) tend to take longer to remove than those done by amateurs (one you get at a party after one too many tequila shots).