Bander 500 static-conductive PVC tile flooring adhesive

Bander 500 is a sort of one-component dispersive water-base adhesive capable of static conduction. It is applicable to binding various kinds of static-conductive or static-dissipative flaky PVC floor. The coating surface resistance is 10000-1000000 ohm.

Bander reinforced 550S is applicable to binding various kinds of static-conductive  PVC sheet floor within 3.5 mm in thickness,  PVC sheet rubber within 3.5 mm in thickness, and rubber block within 2.5 mm in thickness.

1)    Product character

. Solventless and water-based

 Single coated, High viscosity.

 Waterproof, high High resistance to extrusion and shock after solidification..

It is implemented by the GB18583-2001 and solventless, environmental friendly.

2)     Component, water-based Acrylic ester, High pure stable conductive material.

3)     Technical Specification:

Solid content:  65±1%

Viscosity:2000∼3000 C.P.S(LVF 25)

Consumption: Every KG can cover 7-9 SQM

Color: grey 

Valid period: 12 months.

Surface Preparation:

   The surface must be hard, sound and free of dust, dirt and crack. And the surface must be deal with by the standard operations

After the disposal of the vacuum cleaner, please choose the bander primer and the self-levelling cement to deal with the surface again. On the condition that the primer and the self-levelling cement is completely dry, it is time to use the bander floor adhesives.

Instruction:

1) The glue is spread evenly on the ground base by using A2/A3 scraper. The glue drying time is made by the Weather, ground surface absorbency and the glue coating quantity, etc. In the standard environment, worker can apply the PVC floor after 20 minutes.

 2) After the PVC floor installation, the PVC floor paved area must be roll press, and the area has to be roll press once again to assure the adhesive working result.  

3) The not dried left glue can be wipe out by the wet dishcloth or the washed by the water.

Important Indications

1)             The glue can be kept in 12 month on the condition that the temperature is 3-50 and  relative humidity  be under 75%.  The opened barrel has to be closed and used it out as soon as possible.

2)             The best installation condition: Temperature  15-45, relative humidity  be under 75%. The too high and too low temperature can affect the glue paving and solidifying time.

3)             The application on the smooth and good absorbency ground surface, i can enhance the initial viscosity and short the construction time.

Heath Data:

Solventless, not inflammable and without special protection in the right construction. If the glue spatters to the eye, please wash the eye by the water at least 15 minutes. The serious one has to see the doctor.

Castoff disposal

   It is not allowed to let the left glue directly, has to be deal with by the special castoff, and the empty barrel can be recycled.