Hydraulic Tubing Bender for the Bent of Hydraulic Tubes or Pipes

Tubing bender SPC642

 Futures of tubing bender SPC642:

1. Hydraulic driven, which ensures an excellent bending result.

2. Small bending raduis, bending raduis of SPC 642 is from 2.5D to 3D

3. Reliable components, hydraulic pump from Bucher, Parker valves and Schneider                     switchs.

4. Large working ranges, tube OD from 6mm up to 42mm or ¼''-1 ½'', maximum tube wall thickness is up to 5mm.

5. Portable device, fixed onto wheel frame, suitable for both stationary use and on-site               working.

6. Limit switch, very convenient for mass bendings.

7. This SPC642 tubing bender integrates with de-burring,  cutting ring assembly and 37 degree flaring functions. The manufacturer could customize this pipe bender according to your specific requirements.

Details of this tubing bender SPC642:

Bending Dies and Winghead:

 Bending dies: 6,8,10,12,14,15,16,18,20,22,25,28,30,35,38,42mm

Winghead: two bending dies corespond one winghead, ie. 6mm and 8mm bending dies use the same winghead for the bending process.

Both bending dies and winghead can be fixed on the machine quickly,  easily changeover.

Bending dies and winghead.

De-burring unit for tube end internal and external de-burring

hydraulic motor driven, Tube OD: 6-42mm/¼''-1 ½''.

Hydraulic cylinder for cutting ring assembly and 37 degree flaring

Cutting ring assembly unit

37 ° Flaring unit.

 SPC642 tubing bender, the best choice for bending solutions!