shot blast machine/roller conveyor type shot blasting machine/shot blasting machine

Our Q69 steel profile shot blasting machine is a piece of shot blast equipment which can perform preheating, shot blasting, paint spraying and drying processes. It is mainly used for removing surface rust, contaminants and spraying paint onto the surface of steel boards, steel profiles and structural components in industries such as shipping, automobile, motorcycle, bridge, machinery, etc.

The roller bed in the blast chamber as well as front and rear auxiliary chambers is manufactured of steel pipes which offer thick wall and have undergone quenching and tempering treatment. In addition, the roller bed is provided with easy to replace high chromium abrasion resistant steel sheath. This helps guarantee the high rigidity, strength and long service life of roller shaft.

Our steel profile shot blasting machine achieves accurate, effective paint spraying. A workpiece width measuring device is installed at the inlet of the spray booth. The PLC controls paint spraying operations of the spray gun according to the measured data. In this way, the paint squeezed out of the nozzle can be effectively sprayed onto the workpiece surface, which helps improve paint utilization.

The series of Q69 steel shot blasting pre-treament line are mainly consist of warm-up, shot blasting and spray painting and drying process. It applies to shipping ,car, motorcycle, bridge, machine etc. which in the line of steel board, section and structure casting to wipe of surface and painting art. 

1. The impeller head is composed of blast wheel, the structure is simple and durable.

2. BE type segregator is very efficient and it can protect blast wheel.

3. The bag dust filter can greatly reduce air pollution and improve the work environment.

4. Abrasion resistant rubber belt lighten the collision of work pieces, and lower the noise.

5. This machine is controlled by PLC, the operation is easy and reliable

Main Models:

Other roller throuth type shot blasting machine which also can be used to blast cleaning pipes Paramter will be found below:

If the above model not suit for your workpiece, please tell me your need and the following information then we will send you the best technical drawing to you.

1. The max. Length of the workpiece.

2. The max. Width of the workpiece.

3. The max. Height of the workpiece.

4. The productity you need to blasting the workpiece ( how many T or piece per day or per month?)

5. The power supply you need ( such as 380V, 3P, 50HZ)

6. Better to send us the workpiece photo or drawing.

Before and after the workpiece cleaning(Compare the photos)

 Certification:

Commercial terms for shot blasting machine: 

1. MOQ: 1 set

2. Quality guarantee: 12 months from installation date

3. Payment term: 30% downpayment by T/T, 70% balance paid by L/C