Transparent Fiber cable Optical Fiber Cable Network Fiber Cable

Invisible cable Fiber Optical cable 

Features and Benefit

-- Tight weld layers are not isolated, almost transparent. 

-- Outer surface is smooth, no visual visible holes, scars and other defects.

-- The minimum bend radius of 5mm, the room is not dead laying.

-- Handheld laying tool that uses no complicated wiring, convenient

Invisible Fiber Cable Standards

 YD/T 1258.2-2003  The second part of the single-core indoor cable series cable

 GB/T 7424.2-2008  Total cable Part 2 Basic optical cable test methods

 GB/T 13936-1992  Vulcanized rubber to metal bonding tensile shear strength measurement                                                 method of vulcanized rubber and metal bonding tensile shear strength                                                     measurement method

Invisible cable Fiber Optical cable 

 Technical Parameter

Cable cross-sectional view and Hand-held heating installation tool figure

               Figure 1  Cable cross-sectional view

                              Figure 2 Hand-held heating installation tool

Invisible Fiber cable Optic Fiber Cable

The outer diameter:1.1 mm

The outer diameter of Tight outer cover:0.8 mm,

Hot melt adhesive thickness:0.15 mm

Chromatogram:  Colorless and Transparent

Any cross-section of invisible cable should be uniform, without pores or blemishes. Besides ,its outer surface is smooth, no obvious defects such as cracks other.

Installation temperature range:-30℃~50℃  ( -22℉~122℉)

Using temperature range:-40℃~75℃   (-40℉~167℉)

Hand-held heating installation tool

Size:Length 190mm

Weight:100g

                                    Packing