Advanced Magnetic Pipe Gas Cutting Machine CG2-11

1.Weight(body)

14.5KG

2. Machine dimension

305MMX310MMX180MM

3. Power source

220V  50HZ

4. Cutting speed

50-750MM/MIN

5. Cutting thickness

6-50MM

6. Groove angle

0°-45°

7. Cutting range

>108MM(The no-seam pipe)

8) Cutting accuracy

When the machine walks a cycle on pipe, the error is below 0.5mm every 1m circumference. The smoothness of cutting and groove can reach

9. Adsorption affinity of magnetic roller wheel

Above 50kiograms

10. Impulse of machine.

When the machine walks up and down, it is below 0.5mm.

11. Motor

It adopts 70SZ08 servo-motor. 6000r/min, 68W

1.Standard pack

1) Main body

:1set

2) Standard torch unit assemblage

:1set

3) Connector of torch

:1set

4) Tip

:3pcs

  6)  Gas-in connector

:1set

7) Electric case and connecting wire

:1set

8)  Specification sheets and certificate of qualification

:1 pc each

 9)  Safety rope

:1pc

10) Safety buckle

:1pc

11) fuse(3A)

:1pc

1. Body

8.Thermal baffle:To prevent heat to diffuse into the inner of machine.

2 .Cross feeding hand wheel

   To adjust horizontal position of torch.

9.Two-port valve:To adjust the flow.

3. Hoses:Connect them to gas distributor. There are three hoses: preheating oxygen hose, fuel gas hose and cutting oxygen hose.

10.Gas distributor:Gases are: preheating oxygen, fuel gas and cutting oxygen.

11 Speed regulating knob:Decrease the speed along “10” toward “0” anti-clockwise.

4.Torch

5. Adjusting hand wheel of torch

12.Plug seat

6.Handlebar

13.Magnetic roller wheel:The two magnetic roller wheels can make the machine walk along pipe wall smoothly.

7.Reversing switch:To change the direction of machine. “STOP” position is in the middle.