2PCX series of used double rotor sand making machine for sale

Function

The used double rotor sand making machine is developed by Xingyang Ju Xin machinery Co.,Ltd. and it is widely used for crushing calcite, limestone, the cinder brick, slag, shale, gangue, construction waste and so on. And in the brittle stone-crushing production plant and the sand-making production plant, 2PCX series of double rotor sand maker is the best sand-making equipment.

China Juxin used double rotor sand making machine equal to two hammer crushers and this two parts combine together reasonably, abd two sets of rotors used in tandem model.

Features

1 The series of used sand making machine have two consecutive broken through double rotors ,without screen section equipment ,all kinds of wet residue can be crushed ,that is to say ,fished from the water of material also can be crushed at any time .No existing bond and plug phenomenon .Controlling material size is just to control the space between the crushing hammerheads .The common crusher will cause plug because the material stranded in the crushing cavity .And this will lead to relative parts increased  wear .This crusher can avoid the phenomenon completely.

2 High alloy hammer ,the hammerhead and hammer handle combining toghter to use ,only to change the hammerhead ,not change the hammer handle.

3 The unique shift adjustable gap technology ,there  is no need to repair the weared  hammerhead ,moving the location for repeatedly use .A hammer is equal to three hammers in using.

4 The used sand making machine is bi-directional rotation through continuous operation mode of two-way divisions .It is convenient for hammerhead and broken teeth board to wear evenly and reduce the frequency of stopping machine , replacement of wearing parts.

5 The uniform discharge size ,high ratio of crushing ,high yield ,low energy consumption ,crush material more than 20 ton per hour ,the cost of crushing per ton cinder is not more than 1.8 yuan .It is suitable for fine crushing those brittle materials ,no plug ,less dust ,low noise.

6 Shorten the time that the material stranded in the crushing chamber ,improve the life span of the wearing parts.

7 Easy installation improve the equipment degree of freedom largely.

8 Electric-hydraulic operation ,only one person can operate ,repair ,change parts easily.

Operating principle

When working, the double motors drive the two sets of rotors in tandem to do a high-speed rotating at the same time .The material inside the plane cavity are crushed by the higher rotor and recrushed immediately by the lower rotor with rapid rotation .The material inside the plane cavity have mutual rapid collision and mutual shattered to get hammer powder .The effect of the powder formed cinders particles with the discharge size less than 3mm. The particles can meet the tile factories’need for dieselling to make bricks.

Pre-sale:Enthusiastic
We offer you the early planing of the project, the best process flow design, choose the best appropriate equipment model to design products according to your special needs.

Sale: Integrity
All productds have to pass strict inspection with the drawings and process flow according to the contract before they go out. We assigned the technicians to the producing spot to provide installation guide, testing and training.

After-sale:Considerate
To establish good business relationship, we adopt periodical visit to the users. We could give you the definite reply during 24 hours when the users meet some problems in the producing process.

Q: Payment?
A: 30% by TT as deposit on signing the contract, 70% by as final payment of balance after the client's satisfactory inspection of the equipment prior to the goods leaving the factory.

Q: What about Warranty? And what will we do if the machine is broken down?
A: The warranty period for all of structural and mechanical equipment is one year. The warranty period for all electric motors is half one year. Wear parts are not covered by warranty unless the component part is found to be flawed.

Q: What should we need to do for if we want to get a best quotation?
A: Hi, if you want us recommend a suitable type for you, please let us know the details as follows:
   1) The capacity (tons per hour ) do you need?
   2) The size of the raw materials and the size of the finished products?
   3) What's your main raw materials?(soft or hard materials? water content?)

Q: What could you help me to do for the business?
A: Many thanks for your trust, we can provide you with proposal chart for complete production lines, spot inspection and operator traning according to your demands and the conditions of applied spot, we can help you choose the right equipments, drilling rig, loader, trucks, excavators and so on for rotary washer for sand washing.

Q: Delivery time?
A: Standard delivery time for stationary crusher plant is 30 working days from receipt of deposit, the mobile crusher plant is 45 working days.