Rectangular-look pill box timer, Liquid crystal display with buzzer

Specifications

1.Rectangular-look pill box timer.
2.2 compartments to hold pills,tablets and capsules
3.Count down scope:24 hours
4.Liquid crystal display with buzzer
5.Pre-remind you at 10 and 5 minutes before set time
6.Battery:1*AG 13 button cell(included)
7.Unit dimensions:85*51*20mm

packing: Blister
Carton size: 47.5×32×46.5cm
   QTY: 330pcs/ctn
   G.W.: 17kg

Can hold pills, tablets and capsules, also can remind you to take medicine on expected timer.

Can set any time to countdown within 24 hours

It will make out a short beep to pre-remind you at 10 and 5 minutes before set time

INSTRUCTION:

Key A is “ hour”

Key B is “minute”

Key C is “stsrt /pause”

At first, press A and B to set the time you want, and then press C to begin to countdown (the digits on the LCD flash). If you press C for 2 seconds, the timer will pause. (The digits on the LCD do not flash at this moment). If you press C again, the timer will continue to countdown the rest time.

When the set time is up, the timer will make out “beep-beep” alarm to remind you

When the alarm is over, press C, the time will repeat the last setting

Press A and B at the same time, the last setting is cancelled. The time can be reset

If you can not set hour or minutes, please A and B at the same to restart setting

1.Rectangular-look pill box timer.
2.2 compartments to hold pills,tablets and capsules
3.Count down scope:24 hours
4.Liquid crystal display with buzzer
5.Pre-remind you at 10 and 5 minutes before set time
6.Battery:1*AG 13 button cell(included)
7.Unit dimensions:85*51*20mm

packing: Blister
Carton size: 47.5×32×46.5cm
   QTY: 330pcs/ctn
   G.W.: 17kg

Can hold pills, tablets and capsules, also can remind you to take medicine on expected timer.

Can set any time to countdown within 24 hours

It will make out a short beep to pre-remind you at 10 and 5 minutes before set time

INSTRUCTION:

Key A is “ hour”

Key B is “minute”

Key C is “stsrt /pause”

At first, press A and B to set the time you want, and then press C to begin to countdown (the digits on the LCD flash). If you press C for 2 seconds, the timer will pause. (The digits on the LCD do not flash at this moment). If you press C again, the timer will continue to countdown the rest time.

When the set time is up, the timer will make out “beep-beep” alarm to remind you

When the alarm is over, press C, the time will repeat the last setting

Press A and B at the same time, the last setting is cancelled. The time can be reset

If you can not set hour or minutes, please A and B at the same to restart setting