pedometer with pulse monitor/LED light

Specifications

pedometer with pulse monitor

Pedometer Description

Multi-Function

Calorie Burning

Distance

Steps

LED Light

Function

1.Step: counts step taken up from 00001 to 99999.

2.Calorie burning up to 9999.9 CAL

3.Time display and LED torch

Operation

Mode

MODE key pressed sequentially;

  TIME MODE (power on) → STEP MODE → DISRANCE MODE→ KCAL MODE → TIM MODE

Time Set

Under the time mode, set hour by the SET key with the display of hour flashing, increase hour by pressing the MODE key within 2 seconds, ( the hour is increase by pressing the MODE key for more than 2 seconds). With the hour flashing, set minutes by pressing the SET key with the display of minute flashing, Increase minutes by pressing MODE key within 2 seconds, ( the minutes are increased by pressing the MODE key for more than 2 seconds). Return time mode by pressing the SET key or if no key is pressed after 6 seconds.

Step-Length Set

Under the distance mode, set step length by the SET key with the display of step length flashing, increase of 2 IN CH)(5CM) by pressing of MODE key within 2 seconds, Return to distance mode from setting mode if the SET key is pressed or ko ney is pressed after 6 seconds.

Step-length set range: 0-80 NI( 30-200 CM), 28IN (60CM) is the detaulf system.

Weight Set

Under the kcal mode, set weight by the SET key with the display of weight pressing flashing, increased by 10 LBS (2KG) by pressing MODE dey within 2 seconds. If the SET key is pressed or no key is pressed after 6 seconds, the display return to the kcal mode. Weight set range; 70’-270LB(30-120KG), 130LB (60KG) is the default system.

Step Clear

Anytime, the step, distance and KCAL can be cleared by holding the RESET key for more than 2 second.

British imperial/system/The metric system conversion

Under the STEP mode, the system is converted by holding the SET key for more than 2 seconds, At the same time, the display of step, distance and KCAL are cleared, and the weight and step length return to default value.

Attend: 12-hour system is the default system, the display of the time is 12:00, No action after five minutes under other mode, and return to the time mode.

Remarks:

This device use 4pcs AG12(LR43) batteries (3 pcs for LED torch, 1 pc for counting steps). Please change the battery when the LED torch is dim or the display is dark, if the device is not working, please take out the batteries, after 3 seconds, please install the batteries again and it will be work properly.