Popular high quality interior decoration nano coating sio2

Dry powder diatom mud

 Diatom mud is nanoporous materials, porosity up to 90% more than the charcoal 5000-6000 times, with a strong  physical adsorption and ion exchange properties, it can suck the air of free formaldehyde, benzene, ammonia and  other harmful substances.Diatom mud is not only environmental and healthy,but also very practical, which is an  alternative to wallpaper and paint a new generation of interior decoration  materials.

 Product feature

 1) It’s packed by bucket,can be used when open the cover;

 2) It’s mixed with inorganic pigment,so the color can keep until permanent;

 3) It can adjust the humidity interior of wall automatically;it seems the wall can breath;

 4) Construction methods: putty,spray,roll,brush and made by wallpaper model;

 5) It releases the healthy negative oxygen ion for a long time;

 6) It can absorb formaldehyde and smelly air.

 Application of product

 Widely used to hospital,school,kindergarten,entertainment places,office,meeting and all kinds of decorative area. 

 Executive standard:

 JC/T2177-2013 <Diatom Ooze decorative material>

 GB 18582-2008 <Interior wall coating limit of harmful substances>

 Construction steps:

 A. Plain construction:

    1) According to the Qualified of Product proportion, add 9% of water and mix the material for 5 minutes, then  add another 1% of the water,to adjust the dynamic viscosity. 

    2) Confirm the venture: Roll or spray. Use the plastic putty knife to polish the surface before drying the surface.

 B. Screen printing construction:
    1) Design the model of the screen; 
    2) Finish cleaning,dust moving, decontamination the basic wall, then prepare the diatom ooze. 
    3) Roll the diatom material for twice, polish with putty knife before it’s dry;
    4) Draw the flower design according to the Screen printing model with Pencil,then fix the screen printing model  on the wall with fiber glue or gummed paper.

    5) Another worker fix the model on the wall if the printing design is simple, cover the newspaper to keep the  other place clean.

    6) Clean and dry the model if need to use it again..
    7) After taking of the model, should polish the surface with plastic putty knife,to avoid the the power fall off.
    8) To clean the pencil drawing area with eraser. If using fiber pulp to, the surface have to be dry absolutely, then  spray some water,to dissolve the fiber pulp to the water, then brush it with wet towel.

 C. Wallpaper construction:
    1) Carton model
       A) If the design of background wall should construct as “B”shape, may use the pencil to draw out the design. 
       B) Two workers construct it at the same time,to clean the the model after printing every area.
       C) Before the wall is dry,to polish the surface to avoid the powder falling down.
    2) Wallpaper model construction:
      A) To prepare some models, use the laser level meter to fix on the wall;
      B) It needs three workers when construct,and pay attention to the public area. 
      C) During construction, one of the worker fix the model on the wall,another worker scrape the material.
      D) The other worker wash the model and polish the finish.
      E) If the conner can not use the model to scrape the material on the wall,should use the paper model.

 Reference dosage: 3-4kg/m²

 If choose by the powder mix with color in the packing, it can be constructed directly, no need to roll the colour.

 Note: Humidity should be above 85%, it can’t be constructed under 4°C,the material shall be stored in the normal 

          temperature.

2. Colour Picture

3. Project Picture 

For the new style of paint, we may supply disparching Engineer to Foreign Countries and show our 

construction technician.

Any colors, any logo accetable, free sample service, leave an inquiry to know more details about Price.

Packing, Shipping and Discount. 

District, Foshan City.It’s established in 1991, size of it is around 10000 square meters. We are 

professional paint manufacturer which is based on R&D, self design, producing and marketing, 

own lines of self automatic production.

Wanlei company produce nine kinds of products, more than 53 styles of Artistic Paint. We are doing

our best to be the biggest and strongest Artistic paint manufacturer since we started this line of

 business. Our aim is “to make a beautiful wall”. Our company got the experience by testing from the 

time and the society for 20 years, it’s known all for our customers, and become the leader of this line.

Answer: (1)If customer need our engineer to teach the workers, we can supply with this service;   (2)Or else, if place order from our company, may dispatch 1-2 workers learn from our factory.