Home > Products > Slewing bearing > small sized crane slewing ring bearing 010.30.1000.001 1122x878x100mm
small sized crane slewing ring bearing 010.30.1000.001 1122x878x100mm
- Qingdao
- T/T Credit Card
You May Like
-
8t Excavator swing ring bearing 013.35.1405.001 1390x1110x110mm
-
Japanese brand crane slewing ring 013.45.1600.001 1740x1460x110mm
-
crane slewing ring for after sale 012.30.0630.001 732x528x80mm
-
tower crane slewing ring
-
Sumitomo swing ring slewing bearing for crane
-
Single-row ball slewing bearing ring 01 series
Product Details
| Place of Origin | Shandong, China | Brand Name | Titanhorse | |
| Model Number | 010.30.1000.001 |
Product Description
Our Company provides four main types of slewing bearings, as shown in the following figure:
Single-row four-point contact ball series 01
|
Single-row crossed roller series 11
|
Double-row ball series 02
|
Tri-row pin roller series 13
|
Our Company can also design and manufacture other types of slewing bearings according to user’s needs, e.g. double-row ball slewing bearing, ball-pin combined slewing bearing, and light-weighted slewing bearing, etc.
For detailed drawing, please contact us directly.
Detailed Pictures
Production Process
Certification Show
Application
Ø History
l Headquarter founded in the 1980s as a state-owned enterprise, reformed to be one limited liability company in 2005.
l Start to produce slewing ring in 1995, have own brand name for slewing ring.
l Four subsidiaries belong to the headquarter: Ring mill plant, Slewing ring plant, Wheel hub plant, Beijing Titanhorse International Trade Dept.
Ø Company Scale
l Total area: 100,000sq.m
l Factory: 60,000sq.m
l Office: 7,000sq.m
l 700 employees
l Lines of product: forged raw rings (The raw material of slewing ring), Slewing rings, Wheel hub
Ø Production Scale
l Slewing ring 50,000pcs/month
l Ring/flange 8,000pcs/month
l Wheel hub 20,000pcs/month
Ø Unique Advantage
l 6 series of slewing ring, the raceway diameter ranges from 200-5,000mm
l Germany 5S standard site management and QC management engineering standards
l ISO9001:2008, OHSAS18001:1999, ISO14001:2004
Operation & Maintanence
Suitable lubrication is necessary for durability of raceway and gear. Lubricating grease improves capability and service life of slewing bearing, while working condition, e.g. load, temperature, speed, and vibration, determines lubricant selection.
Characteristics of recommended lubricant for slewing bearing:
² Lithium base grease
² Minimum viscosity of base oil: 150 mm2/S
² NLGI consistency grade: 2
² Anti-friction and extreme pressure additive
² Working temperature: -300 Ca+1200 C
² Four-ball test: Clinkering load STMD 2596 (NT24)>300
² Maximum NDM value (revolving speed x raceway center diameter)
ü For ball slewing bearing=60000
ü For pin roller slewing bearing=30000
Lubricating grease compatibility table
According to our experience, the lubricating greases listed in the following table are compatible with each other and with all parts of slewing bearing. Any other grease which is deemed compatible with any of the lubricating greases recommended by the Company is usable. However, molybdenum-containing disulphide MOS2 is strictly prohibited.
Grease for raceway of slewing bearing |
Lubricating grease designation |
Grease for gear | ||||
| Aralub HLP2 | ARAL | Aralub LFZ1 |
| ||
| Rhus L 474/2 | MOTUL/bECHEM | Berulit GA 400 |
| ||
| Energrease LS-EP2 | BP | EnergolwRL/GR 154 GS |
| ||
| Grease LMX | CASTROL |
| |||
| Epexa2/Epexelf2 | ELF | Cardrexa DC1 |
| ||
| Beacon EP2 | ESSO | Surret Fluid NX |
| ||
| Mobilux EP2 | MOBIL | Mobilgear OGL 007 |
| ||
| Retina EP2-Alvania EPLF2 | SHELL | Malleus GL 205 |
| ||
| Multis EP2-Lical EP2 | TOTAL FINA ELF | Ceran AD |
| ||
This table is subject to update by manufacturer.
Removal of Common Faults
Difficult turning of slewing bearing
Every slewing bearing goes through strict inspection and test run before being released from plant, so all of them are acceptable products. As the slewing bearing has pre-tightening force on its sealing face and frictional force of the sealing face should be overcome for turning, it’s normal that certain starting moment is needed when it is turned.
In case of clamping stagnation in turning, the following method should be taken to remove the trouble:
Case |
Cause analysis |
Troubleshooting methods |
Inflexible idling of new product | The slewing bearing has been stored for long time (e.g. over a half year) or the ambient temperature is low, which results in less liquidity of the grease inside, leading to inflexible operation. This case is prominent in cold regions and in winter. | After force is exerted, if it works well without any abnormal sound, it can serve for normal serve, but new grease should be filled until it is oozed from the seal. If operation is accompanied with any abnormal sound, check whether there is any damage caused during transport or storage and feedback the information to our after-sale service department for a solution. |
Inflexible operation after installation | The mounting surface of the main machine does not match well with that of the slewing bearing, resulting in that after installation, axial clearance of the slewing bearing can’t compensate for deformation of the slewing bearing, raceway of the slewing bearing is distorted, and the roller moves with difficulty in raceway (sometimes with abnormal sound). |
Rework mounting surface of the main machine to make it in compliance with the requirements; or treat the surface by filling in plastic or partial washer. If flatness is still unacceptable after completion of surface treatment, try to exchange for a slewing bearing with larger clearance. |
Bad gear engagement is caused by failure to adjust gear backlash according to radial top point of gear pitch circle (three teeth marked with green paint). Deformation is caused by compressing the slewing bearing at the top point, resulting in difficult turning or abnormal sound. | Adjust gear and pinion engagement and gear backlash again as required. | |
Impurities are jammed in the gear and pinion. | Check and be sure that gear and pinion engagement is free of impurities. | |
Inflexible operation in use | The sealing strip is broken, resulting in entry of impurities into raceway. |
Replace sealing strip or take effective sealing protection measures, e.g. installing guard plates. |
Failure to lubricate it with sufficient grease periodically according to the maintenance requirement, resulting in abnormal wear and tear of raceway. | Lubricate it with sufficient grease until grease is oozed out from the sealing strip. It’s noted that every oil cup should be oiled, and operation should be kept in oiling, if possible. If wear and tear is serious, the slewing bearing should be replaced. If you continue using it in short time, lubricate it with more amount of grease until grease overflows, so that the scrap iron is discharged as most as possible. | |
Abnormal engagement between gear and pinion, with impurities or broken teeth | Remove impurities (if any); replace the slewing bearing, if there is any broken tooth. |
Contact Us
- Beijing Titanhorse Industry & Trading Co., Ltd.
- Contact nameWendy Dong Chat Now
- Phone86-10-63870478
- AddressRoom 5033, No. 9 Building, No. 16, Fengguan Road
Product Categories
New Products
-
TR series bearings
-
Slewing ring bearing for construction machinery
-
Double-row ball slewing bearing ring use in radar
-
Double-row ball slewing bearing ring with outer gears 013.45.1600.001 1740x1460x110mm
-
slewing rings used for excavator
-
Chinese slewing ring bearings in reasonable price 021.25.0560.002
-
Slewing ring bearing manufacturer for 2kw wind power generator blades
-
Trailer turntable bearing
-
external gear slewing rings
-
Chinese brand Truck Cranes slewing ring bearings
-
12t Excavator slewing ring bearings
-
Chinese Manufacturer Good Quality crane slewing ring bearings
-
Crane slewing ring bearings
-
42Crmo4 slewing bearing crane swivel part 011.25.0800.001
-
Changsha manufactured crane slewing ring bearings 023.30.1000.002 1142X858X124mm
-
100t tower crane slewing ring bearings 011.50.2000.001 1762x1434x124mm
-
crane slewing ring bearings for swivel 011.20.0315.001 280x120x60mm
-
Roller slewing bearing 2kw wind power generator blades
-
Japanese brand Tower crane slewing ring 111.50.3150.001 376x2922x134mm
-
Single-row ball slewing bearing used for robot
-
Single-row ball Cross-roller slewing ring bearing
-
Double-row ball slewing bearing for tower cranes
-
Outer geared slewing bearing
-
Outer Gear Single row ball slewing bearing 011.25.0560.001 662x458x80mm
Popular Searches
- Air Cleaner Parts
- Diesel Engine Spare Part
- piston ring
- cummins parts
- Water Pump Assembly
- Oil Cooler Assembly
- Engine Components
- Cylinder Head Gasket
- Diesel Engine Part
- gasket kit
- Valve Cover Gasket
- Oil Drain Plug Gasket
- Hydraulic Motor
- power unit
- genuine cummins
- Cylinder Liner
- c18
- Main Bearing
- cylinder liners
- Rear Idler
- high pressure oil pipe
- high pressure pipe
- engine gasket kit
- automobile brush
- engine fan
- Hose Clip Clamp
- centrifugal clutch
- concrete mixer motor
- Engine Parts Gear
- fan assembly
Recommended Products
- Customized Drilling Tool Kelly Bar Strips and Locks for Rotary Drilling
- Friction Kelly Bar for Rotary Drilling Rig Can Customized
- Kelly Bar High Wear Resistance, Custom-Made, Specifically Designed for Rotary Drilling Rigs
- Rotary Drilling Rig Interlocking/Friction Kelly Bar
- Rotary Digging/Drilling Machine/Bauer Piling Rig Spare Parts Kelly Bar
- Best Sale Kelly Bar for Hydraulic Piling Machine Rotary Drilling Rig
- Customizable All-Brand Rotary Rig Drilling Spare Parts Interlocking Kelly Bar
- Foundation Piling Machine Accessory Part Rotary Drilling Rig Kelly Bar
- Rotary Rig Machine Interlocking Kelly Bar Friction Kelly Bar for Foundation Construction
- Kelly Bar for Rotary Drilling Rig Interlocking/Friction
- China Piling Rig Rotary High Quality Kelly Bar Can Customized
- Rotary Drilling Rig Spare Parts Interlocking and Friction Kelly Bar for Sale
Find Similar Products By Category
- Manufacturing & Processing Machinery > Engineering & Construction Machinery > Engineering & Construction Machinery Parts
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Wendy Dong
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile