12 volt lithium ion battery power bank car jump starter

Specifications

12 volt lithium ion battery power bank car jump starter  

Parameters                                               

Feature                                                  

Jump starter – to Emergency Car Jump Starter a dead battery of Motorcycle, Boat, Jet Ski, ATV and Lawn Mower just in seconds. It can jump starter the vehicle battery 25 times on a full charge.

Power Bank – to charge portable electronic devices, such as mobile Smartphones, tablets PC, digital cameras, Bluetooth headsets, portable GPS devices, and any other DC 5V powered electronic devices. It only takes 1-hour for a smart phone to be fully charged.

 19V Output Port for Laptops

 16V output Port for Apple Laptop

 12V Standard Output Port

 5V USB Port

LED Light–to use as Hi-Power LED Flashlight (with 3 flash patterns) 

Lighted battery indicator,-Automatic power-off when not in use

Protection circuit- Built-in over-charge and over-discharge, reverse polarity, short circuit protections

Features                                                              

 1. Emergency jump starter more than 35 times  when fully charged . 

2.Bright Lighting  80 hours .

3.Start the car immediately even in cold winter .

4.Detonation Flash 120 hours .

5.SOS signal 240 hours .

6.Charge different model mobile phones .

7.Laptops power station supply

8.1/20 size of the old jump starter .

9.3 to 5 years Using lifetime .

10.Rechargeable ,Convenient with AC Wall Adapter and 12V DC Car Cigarette Lighter Plug 

Benefits                                                               

1.Easy Jump start all 12V gasoline&diesel vehicle multiple times on one charge.

2.USB Port for quickly charge smartphone, tablet and other mobile devices multiple times.

3.Built-in LED Flashlight,Super-bright work, strobe and S.O.S. Emergency LED light.

4.20000mAh Lithium-Cobalt Battery,Holds a charge longer and smaller than traditional jump starters.

How To Jump Start A Vehicle Battery              

1. Make sure the battery capacity of the device is above 30% (At least two solid indicator lights are ON).

2. Plug the jumper cables into the barrel socket of the device and connect the jumper cable clamps to the drained battery of the vehicle.

3. Now attempt to crank start the engine. 

4.After the engine has successfully started, disconnect the jumper cable clamps.

WARNING                                                           

1.Always connect the BLACK clamp to the negative ( - ) terminal of the car battery first, then connect the RED clamp to the positive ( + ) terminal of the car battery to prevent damage to the device and/or the car battery.

2.Do not touch the RED and BLACK cable clamps together or connect both cable clamps to the same piece of metal to prevent personal physical injury and damage to the device and/or the vehicle.

3.Not recommended to use the jumper cables for any other purpose other than jump starting a vehicle.

4.If the engine does not start immediately on the first try, disconnect the jumper cables from the car battery and wait at least 10 seconds before reconnecting the jumper cables to the car battery and attempting to start the engine again to prevent damage to the device and/or the car battery. 

5.Recommended Vehicle Engine Displacements for Standard Jump Starting 

• Gas powered vehicles - 6.0L and lower displacements
• Diesel powered vehicles - 3.0L and lower displacements

PLEASE KEEP AWAY FROM CHILDREN AT ALL TIMES!

Shipping                                                

After Service                                        

 1. All the car jump starter with one year warrenty except man-made damage

 2. Global car jump starter liability insurance (Allianz) coverage: USD 5 Million