MIC24-24-24-8 Particle Filling Machine/Semi Automatic Particle Filling Machine

MIC24-24-24-8 Particles beverage/ fruit juice/water filling machine

Wind feeding bottles, automatic washing, filling with particles drinks, drinks filled, sealed.

Full suspension in the device once completed, the bottle grains, filling valve is not blocked, and the bottle outside the red liquid, blowing, can be cold, hot filling.

Very good solution to the juice beverage filling with particulate difficult problem.

MIC24-24-24-8Particles beverage/ fruit juice/water filling machine is packed with export standard wooden cases

We will offer our technician for oversea Particles beverage/ fruit juice/water filling machine installation and training service.

We can also provide our Sales as translator to your site help the installation and Training.

Only to provide the local transportation, accommodation, air tickets (round trip) for Sales will be fine.

Thank you for choosing MIC Machinery Company.

 For Automatic Particles beverage/ fruit juice/water filling machine question:

First of all, before we operate Automatic Particles beverage/ fruit juice/water filling machine, to clearly understand the instructions clearly Automatic Particles beverage/ fruit juice/water filling machine, first read through the instructions again, adjust and use the familiar  Automatic Particles beverage/ fruit juice/water filling machine , the operating time must be in strict accordance with the instructions to Automatic Particles beverage/ fruit juice/water filling machine instructions , pay attention to details of the problem , certainly the details determine success or failure 

Secondly, in accordance with the instructions on the machine for regular repair and maintenance of the Automatic Particles beverage/ fruit juice/water filling machine fuselage Oil it , so Automatic Particles beverage/ fruit juice/water filling machine body as far as possible to protect the reservoir , so that the air can be isolated to avoid Automatic Particles beverage/ fruit juice/water filling machine rusty , well protected Automatic Particles beverage/ fruit juice/water filling machine body, and this is a way to extend the life of the 3 in1 filling machine .

Once again, we have to pay attention to hot stand -sealing cloth for cleaning, not retained foreign body in the above , to ensure clean  Automatic Particles beverage/ fruit juice/water filling machine try to avoid the amount of material for a long time into the mouth of the left cause corrosion .

Fourth, we should always check the machine to see contacts at various parts of the machine is good, important to ensure safe use of electricity, no electricity properly to prevent harm.

Fifth, if found faulty , we have to turn off the power , when necessary, by pressing the emergency stop button , and then deflated lift cover, and then close the voltage , check the reason , and troubleshooting.