the price of steel waiting chair 4 seat

  hair salon waiting chair

Generally by the plate (including the back of a chair), beams, armrest and horse.In most cases by several connect seating structure.Single row but make it a double, three and four bits, etc., for the convenience of transportation, and field use, single row generally not more than five people.Some occasions because of the need can add tea table between the seat or handrails and accessories.Waiting chair general according to the need to put on the spot, has the weight of the larger, difficult to move or move.plateFour waiting chairUsually use a metal (steel plate), plastic or wood materials, such as higher places on it with a soft mat, form the same as the auditorium chair cushion.Often use unit seat, back connected structure, no moving parts.Plate for solid, durable.Must be combined with beam firmly.Require seat surface to withstand the power of not less than 2000 n, the back panel can withstand the power of not less than 760 n.The beamSeveral of the plate, a row of main fittings at the same time, the entire row of seats.Must ensure that its strong, have larger bearing capacity, much by metal profiles (beams, crude steel tube, etc.), to keep beautiful, more use a metal pipe, square tube, pipe or other special pipe, etc.).Waiting chair almost all components (including: plate, railings, tea table, stand feet, etc.) should be fixed on the beam.The armrestDouble row waiting chairWaiting chair armrest dispensable, sometimes on both sides of each seating only have armrest, individual cases each bit is equipped with handrails.Waiting chair armrest must be sturdy, can bear larger power, in order to avoid damage in people in the improper use or crowded armrest.Armrest use metal, more firmly attached to the beam or seat.Stand feetStanding ground support foot is waiting chair, generally is metal frame, request connection is firm, can bear larger load, can firmly hold the ground, should not be moved.