MIC40-40-10 Automatic Carbonated Beverage/bottling/packing Machine For Soda Water Quality Choice

MIC40-40-10 Three in one carbonated/soft juice beverage filling machine

This series of equipment used in various PET bottled carbonated beverage production.

Washing bottle, filling and capping in one machine.

Machine design scientific and reasonable, appearance, complete functions, operations.

Easy maintenance, high degree of automation.

Feature 

1) Bottle is entered by air conveyor, the speed of bottle entering is fast and bottle shape is not changed because of adopting hanging clamping bottle neck way.

2) Adopting clamping bottle neck way to wash bottle mouth and avoid touching screw mouth, adopting clamping bottle neck way in the whole conveying process. When bottle type changes, you only need to change the board related with bottle diameter.

3) Opening valve is driven by cylinder. High filling speed and mass flow rate, high precision of filling value and control of liquid level is accurate and without loss.

4) The capping system applies advanced French technology, when clamp the cap will immediately and magnetic torque type capping head

5) The PLC and transducer are chosen from international famous brand, such as OMROM, MITSUBISHI and so on.

Three in one Isobaric carbonated beverage filling machine by stardand export package wooden cases

We will offer our technician for oversea carbonated/soft juice carbonated/soft juice beverage filling machine installation and training service.

We can also provide our Sales as translator to your site help the installation and Training.

Only to provide the local transportation, accommodation, air tickets (round trip) for Sales will be fine.

For carbonated/soft juice beverage filling machine question:

First of all, before we operate carbonated/soft juice beverage filling machine, to clearly understand the instructions clearly carbonated/soft juice beverage filling machine, first read through the instructions again, adjust and use the familiar carbonated/soft juice beverage filling machine, the operating time must be in strict accordance with the instructions to carbonated/soft juice beverage filling machine instructions, pay attention to details of the problem, certainly the details determine success or failure.

Secondly, in accordance with the instructions on the machine for regular repair and maintenance of the carbonated/soft juice beverage filling machine fuselage Oil it, so carbonated/soft juice beverage filling machine body as far as possible to protect the reservoir, so that the air can be isolated to avoid wine machine rusty, well protected carbonated/soft juice beverage filling machine body, and this is a way to extend the life of the 3 in1 bottling machine.

Once again, we have to pay attention to hot stand -sealing cloth for cleaning, not retained foreign body in the above, to ensure clean carbonated/soft juice beverage filling machine try to avoid the amount of material for a long time into the mouth of the left cause corrosion.

Fourth, we should always check the machine to see contacts at various parts of the machine is good, important to ensure safe use of electricity, no electricity properly to prevent harm.

Fifth, if found faulty , we have to turn off the power , when necessary, by pressing the emergency stop button , and then deflated lift cover, and then close the voltage , check the reason