MIC-12-1 Germany Standard TOP Quality Small Yield Plastic or Aluminum Can Beverage Filling Equipment 1000-2500Can/hr With CE

MIC-12-1 Germany standard TOP quality small yield Plastic or Aluminum Can beverage filling equipment 1000-2500Can/hr with CE

Pop can filling machine with carbonated drink is applicable for equal pressure filler and capper of carbonated drinks in beer and drink industry. It is a pop canned beer in the digestion and absorption of advanced foreign and domestic sealing machine on the basis of independent development of the can filling, sealing unit. Filling and sealing is the overall designed, power system by filling sealing system to ensure that both the absolute synchronization and coordination. It adopts the advanced machine, electrical equipment, and pneumatic control technology.

This machine need air compressor, 0.8 m3/min 10Kg is enough
This machine can be connected with:
- Water treatment system
- Can depalletizer
- Can rinser
- Can filler-seamer monoblock
- Can turning device
- Can cooling tunnel
- Can turning device
- Liquid level inspector
- Filled can secondary packaging system (shrink-wrapper or carton packaging machine)
- Palletizing system

According to customer’s requirement, we will offer our technician for oversea to install and adjust for MIC-12-1 Germany standard TOP quality small yield Plastic or Aluminum Can beverage filling equipment service.
We can also provide our Sales as translator to your site help the installation and Training.
Only to provide the local transportation, accommodation, air tickets (round trip) for Sales will be fine.

For Plastic or Aluminum Can beverage filling equipment question:

First of all, Before we operate Plastic or Aluminum Can beverage filling equipment, to clearly understand the instructions clearly Plastic or Aluminum Can beverage filling equipment, first read through the instructions again, adjust and use the familiar Plastic or Aluminum Can beverage filling equipment, the operating time must be in strict accordance with the instructions to Plastic or Aluminum Can beverage filling equipment instructions, pay attention to details of the problem, certainly the details determine success or failure

Secondly, In accordance with the instructions on the machine for regular repair and maintenance of the Plastic or Aluminum Can beverage filling equipment fuselage Oil it, so Plastic or Aluminum Can beverage filling equipment body as far as possible to protect the reservoir, so that the air can be isolated to avoid Plastic or Aluminum Can beverage filling equipment rusty, well protected Plastic or Aluminum Can beverage filling equipment body, and this is a way to extend the life of the 2 in1 filling machine.

Once again, we have to pay attention to hot stand -sealing cloth for cleaning, not retained foreign body in the above, to ensure clean Plastic or Aluminum Can beverage filling equipment try to avoid the amount of material for a long time into the mouth of the left cause corrosion.

Fourth, We should always check the machine to see contacts at various parts of the machine is good, important to ensure safe use of electricity, no electricity properly to prevent harm.

Fifth, If found faulty , we have to turn off the power , when necessary, by pressing the emergency stop button , and then deflated lift cover, and then close the voltage , check the reason , and troubleshooting.

Sixth, How to adjust the filling liquid level and filling nozzle
Video: /watch?v=oCNnUeE1OHY

If you want to know more information about us, please click here
Thank you for choosing MIC MACHINERY CO., ltd