FMS-375 Flush mounted slips

FMS-375 Flush mounted slips

1. Model: FMS-375 Flush mounted slip

2. a hydraulic operation tool for clamping casing during the drilling operation of petroleum and natural gas

3. Apply to the use of the 375 turntable, this flush mounted slip structure is compact, safe and reliable, which solves the back sprains and fatigue that many be occurred when workers use the manual slip, reduces labor intensity of workers and improves the work efficiency.

4. When being installed on a turntable, it should keep horizontal to turntable and is convenient for the works of casing tong

5. It does not need to build another working platform to achieve a clean and safe working environment.

6. The pressed slip can clamp the casing tightly so as not to re-use manual slip and back-up wrench.

Main Technical Parameters:

1.Load: 500T

2. Applicable casing pipe diameter: 4-1/2~14

3. Turntable size: 37-1/2

4. Height: 35

5. Maximum torque: 35,000ft-lbs(47.5kN·m)

Hydraulic system technical parameters

1.Maximum working pressure: 2500PSI(17.5MPa)

2.Loop pipeline filter: 10 micrometer

3.The maximum operating oil temperature: 82°C;

4. Before starting the operation of the equipment, firstly make the slip body do alternating movement up and down to exclude the air in the hydraulic pipelines;

Note:This table only applies to the situation of no pressure on loop pipeline.