3.50-4 or 4.00-8 Small Wheel barrow Solid Tyre Curing Press

Specifications

Solid tyre curing press made from rubber powder

Application:

This solid tyre curing press is used to make solid tyres directly from rubber powder, the finished products are solid tyres, it can be used in hand truck, wheel barrow,garden tools, and so on.

Features:

1. The material of the piston is LT-P chilled cast iron, the surface is chilled cast iron of vanadium and titanium alloy hard and wearable. It is burnished and polishing by manpower. The hard surface depth can reach to 0.5-0.7mm.

The cylinder mateerial is QT500-7 ductile cast rion and the inside surface is high pressure and nitroger treatment, the surface is burnished and polishing by manpower too. The hard surface depth can reach to0.7-0.9mm.

The set of hydraulic cylinder contain pistin, cylinder , gland ring and the flange. The flange press the gland in order to pevent spillage oil. The material of the gland rig(XY) is oil resistance rubber.The hydraulic system are fond and maching by ourself.

2. The electricit system we can useMITSUBISHI, DELTA , SCHNEIDER,SIEMENS etc .You can choose option what kind brand that you want.

3. The hydraulic contain three sets low-prssure motor pump and one set high pressure motor pump.

You can also appointment brand of the motor and pump you want. Our engineer can redesign it according to you specific demand.

Detailed Technical Parameter as follows:

1: first step: rubber mixer or you can call it rubberstirrer,

    it is used to warn up and mix rubber powder with chemcal material,

		Model NO:	XB-200
		Stirring speed(r/min)	63
		Motor model	YB112-4
		Motor power(KW)	4
		Motor speed(r/min)	1450
		Decelerator	BLB13-23
		Reduction ratio	23:01
		Weight(kgs)	600

2: second step: rubber curing press with moulds:

 it is used to vulcanizing well mixed rubber powder, to get vulcanized solid  tyres

		Model NO.	XLB800*800*2
		Mould closing pressure  (tons)	200
		Plate space (mm)	300
		Plate size(mm)	800*800
		Plate layers	2
		Plate Quantity(pcs)	3
		Max.plunger stroke(mm)	500
		Diameter for Oil Cylinder(mm)	400
		Heating way	Electricity/steam
		Main motor power (KW)	5.5
		Structure form	Frame type
		Safety equipment:	Emergency stop device
		Payment terms:	T/T
		Delivery time:	30days after deposit

This line is very easy, and economic,  one set of curing press can equip with 8 sets moulds, and it takes 40-50minutes per time. so the daily capacity is about 190pcs tyres for 16hours.

our company can produce other kinds of curing press,such as rubber tile vulcanizer, seal ring vulcanizer,rubber sheet foaming press, rubber slippers vulcanizing press, and so on.

welcome to inquire for detailed,you can also tell us your aimed machine,we can design for you.

This is curing press to make rubber floor tiles,

This is rubber sheet foaming curing press

Our company have professional Technique Enginners, we can design and produce by client's request, therefore we sincerely look forward to your inquiry, please contact with us by email or 0086-0532-55588331