SHINVA Rider Endoscope Washer-disinfector

Specifications

It is a kind of washer-disinfector specially designed to sterilize soft endoscopes, complying with ISO 15883-4. In this sterilizer, the following disinfecting agents can be used: glutaric dialdehyde; peracetic acid; o-phthalaldehyde (OPA); chlorine dioxide; electrolyzed oxidizing water.

Endoscope Protecting Design

Leakage Detecting Function

Leakage detection is finished before the endoscope comes into contact with the liquid in the washer-disinfector, and it is continuous. Visual and phonic alarms will occur and the program will automatically be ended when it is detected that endoscope leakage amount surpasses the permitted set value.

Blocking Detecting Function

Unblocking tests on the tube interior of the soft endoscope will be conducted before the endoscope comes into contact with the liquid in the washer-disinfector and when processing is finished. Visual and phonic alarms will occur and the program will automatically be ended when it is detected that the tubes are blocked.

Self-disinfecting Function

An independent self-disinfection program can be run in the process of maintenance and repairs and after use, by which washing grooves and tubes can be thoroughly disinfected, including the 0.2 um filter. Thus the washer-disinfector itself will not become a polluter.  

Washing   Enzyme Cleaning   Rinsing   Disinfecting   (Sterile Water) Rinsing   Drying

                      Leakage Detection of the Whole Process

Wash and disinfect an endoscope in the shortest time!

Rider can accomplish the whole process of washing and disinfecting of an endoscope in 15 minutes, improving its using efficiency to the largest extent.

Process Tracing System

Process data printing

The printer prints the process data of cleaning and disinfecting of each endoscope time-reasonably, satisfying the recording and archiving needs of the operators.

Process data management

The information of the endoscope and the operator can be collected. Together with the process data of the endoscope washing and disinfecting, they are connected with the user’s management computer system by network. So the information synchronization management of the patients and the endoscope can be easily realized.

100% Washing and Disinfecting

Washing and disinfecting of all positions and all pipes

There are rotating nozzles and rotating spraying arms inside the washing groove, and they can wash and disinfect the endoscope surface in all positions. And meanwhile the circulating water continuously flushes, cleans and disinfects all the inner pipelines of the endoscope.

Booster pump of the endoscope lumen

There are booster pumps of the endoscope lumen which can thoroughly flush the tiny lumens, like air/water injecting and the live checking terminal, reducing the forming probability of bacterial bio-membranes.

Sterile water rinsing

After sterilizing, sterile water, which has been filtered by a 0.2μm filter, is used in rinsing. So the sterilized endoscope won’t be contaminated by unclean rinsing water.

Drying function

Optional between air and alcohol drying, and the outer surface inner pipes of the endoscope can be dried. 

Perfect Medical Personnel Protection

Automatic door; foot pedal switch

Automatic visual glass door for the convenient viewing of the washing and disinfecting conditions; the glass door can be easily closed and opened by the foot pedal switch even if the hands are holding the endoscope.

Entirely sealed

The Rider sterilizing groove applies an entirely sealed structure, and the automatic glass door will press in the sealing rubber gasket. So the odor of the sterilizing agents won’t leak out, protecting the operator’s health to the largest extent. 

Automatic agent adding

The machine is connected with the chemical agent barrel by the connector, thus the operator is free from getting damaged in pouring the agents.

The product information will probably be updated without notice, if that happens, please refer to the latest technical material.