5-100T/D Non-acid Biodiesel Machine Price and Small Biodiesel Plant for Sale

5-100T/D Non-acid Biodiesel Machine Price

Small Biodiesel Plant for Sale

Biodiesel is used for chemical industry field, it makes bio-oil into biodiesel. Bio-oil can be plant oil ,animal oil or high acid oil waste oil.

The set of biodiesel plant contains the international advanced pre-processing section,esterification process and distillation process,and it meets the European Union Standards.We have obtained patent,and patent No. is ZL200920089138.8.

Non-acid method Biodiesel Preparation Project introduction:

In order to reduce the biodiesel production process "acid residue" and "sodium waste,", the company technical staff and experts conduct a long-term domestic oil research trials and developed a new biodiesel preparation process - Biodiesel non- acid-catalyzed production technology. The process uses a fatty acid containing a large amount of oil, under a certain pressure, temperature and special alloy catalyst pre-esterification reaction with industrial grade glycerol. Generating monoglycerides,  diglycerides, triglycerides mixture.

Non-acid catalyzed biodiesel production process advantages:

1. No sulfuric participation in, it does not produce acid residue and sodium waste;

2. High concentrations of byproduct crude glycerin, which conducive distillation industrial products glycerin;

3. Do not use methyl vapor generator, which saves steam and reducing the consumption of methanol.

The set of biodiesel equipment contains the international advanced pre-processing section,esterification process and distillation process,and it meets the European Union Standards.We have obtained patent,and patent No. is ZL200920089138.8.The production steps are as follows:

1.Preprocessing section of bio-oil: when heated to 65~70°c,bio-oil is leached to remove impurities. 

2.Drying section:bio-oil without impurities is dehydrated and dried 

3.First esterification reaction:adding bio-oil dehydrated to methanol including 3% sulfuric acid,first esterification reaction starts,and it  will take 1.5~2.5 hours. 

4.Second esterification reaction:this esterification reaction will take 9~12 hours. 

5.Vacuum drying section: Second esterification reactants are dried with vacuum,removing moisture,reducing water content below 3%. 

6.Distillation section: with vacuum state,section esterification reactants after vacuum drying section are heated to 220°c,biodiesel forms by steaming.Then cooling biodiesel to be liquid ,the liquid biodiesel is just finished biodiesel.

7.Methanol fine-distillation:after biodiesel is isolated,the remaining methanol liquid is distilled to form methanol.Cooled methanol can be reused.  

Equipment advantages: 

1.Stable process performance

2.Simple operation

3.Small investment of equipment

4.High conversion rate(up to 85%)

Animal&vegetable oil and acid oil can be used to make biodiesel.Biodiesel is novel green fuel,there are following featurers:

1.Good driving performance for low-temperature motor,cooling point can reach -10°c without adding agent

2.Good lubrication performance ensures low wearing rate of oil spraying pump,engine tank and rods

3.As flash point of biodiesel is higher than mineral diesel,biodiesel does not belong to dangerous goods.

4.Sulfur content is low,small emission

5.low residual combustion char(0.02%),i.e. microparticles content of waste gags is low.

6.Damage of waste gas after combustion is lower than that of mineral diesel 

7.High biodecomposition rate is favorable for environment protection.

Note:

1.We are resonsible for installation and debugging;

2.Instruct operation workers about the operation skills and offer technical service. 

3.Quality warranty of the whole set of equipment is offered;

 Biodiesel production machine