Electrical Automation Training Equipment XK-SX5C for educational PLC training

XK-SX5C Electrical Automation Training Equipmenf for educational PLC training constitutes by operation platform, power supply control screen, mesh board, 2 set three-phase asynchronous motor (coaxial connection rotary encoder), PLC, frequency converter, touch screen, common electrical components, virtual load interface unit, virtual load software and relative accessories. The virtual load software is based on 3D technique which can finish several kinds virtual control object project training, some automation and electrical project.

XK-SX5C finish PLC commonly used programming instructions learning and training, frequency converter application training, typical motor control training, typical lighting distribution electricity training, typical machine circuit training, typical relay contact device control PLC reconstruction project. Have a safety protection function

1. Size: 700 mm x 1800 mm x 450 mm, weight: 50kg

2.Product power supply: three-phase five-wire system AC380V voltage, frequency 50/60Hz, Power<1000VA

3.Experiment power supply

1) DC24V voltage source 1 path

2) AC24V voltage source 1 path

4. PLC: can choose Siemens, Mitsubishi, Schneider, Omron, AB and other brand products

5. Frequency converter: can choose Siemens, Mitsubishi, Schneider, Omron, AB and other brand products.

6.Touch screen: TCP7062KX, 7 inch color touch screen.

.

1. Electrical components

2.PLC programming cable:1pce

3.Virtual load interface unit and virtual load software

Virtual load software is based on the first visual virtual technology, it use 3D complete simulation technology, through the communication between interface unit and PLC, and finish the corresponding action under the control of PLC, the training module has the advantages of little power consumption, no pollution, in gage, no risks, strong expandability, easy to upgrade, it also can instead real object device training, infinitely repeated use, these simulation controlled object can be assorted to all kinds of PLC to use. The simulation load software contains:

Full automatic washing machine

Robot arm

Electroplating production line

Automatic feeding and loading system

Responder

Automatic punching machine

Traffic light

Sky tower light

Automatic sorting mail

Material automatic transportation trolley

Water tower liquid level automatic control

Multi-kinds liquid mixture

Flow water production line

Automatic vending machine

Automatic rolling machine

Flexible production line

1.To understand the hardware and software

1) To understand PLC hardware

2) PLC wiring training

3) To learn the PLC inner resource

4) To use the PLC programming software

5) The uploading, downloading and online monitoring for PLC application programme

2. PLC basic instruction practice training

1) Boolean instruction training

2) Timer instruction training

3) Counter instruction training

4) Transfer instruction training

5) Data shift instruction training

6) Arithmetic operation instruction training

7) Logic instruction training

8) Sequence control relay instruction training.

9) Full automatic washing machine

10) Robot arm

11) Electroplating production line

12) Automatic feeding and loading system

13) Responder

14) Automatic punching machine

15) Traffic light

16) Sky tower light

17) Automatic sorting mail

18) Material automatic transportation trolley

19) Water tower liquid level automatic control

20) Multi kinds liquid mixture

21) Flow water production line

22) Automatic vending machine

23) Automatic rolling machine

24) Flexible production line

3. PLC control three-phase asynchronous motor running project training

1) PLC control of motor running/stopping

2) PLC control of motor jogging self-locking

3) PLC control of motor forward/reversal rotation

4) PLC control of motor star-delta start.

5)PLC, contactor, motor control wiring training

4.Frequency converter practice training

1) Converter controlled by operation panel.

2) Jogging run experiment

3) Running controlled based on outer potentiometer

4) Running controlled by outer voltage.

5) Analog export detection experiment.

6) Digital export detection experiment.

7) Multi-step speed control experiment.

8) PLC control of running experiment.

5.Touch screen practice training

1) Acquaintance and software programming.

2) Comprehensive practice with PLC

3) Comprehensive practice with PLC and frequency converter.

6. The training of motor controlled by relay and contactor.

1) Motor running/stopping

2) Motor jogging self-locking

3) Motor forward/reversal rotation

4) Motor star-delta start.

7. SCADA software training (Kingview DEMO version software)

1) SCADA software application

2) Basic animation connection application

3) Movement and zoom animation connection application

4) Vertical movement animation connection application

5) Data input and output animation connection application

6) Typical SCADA project training.

                     Ms. Sally Zhao

                     Skype: xksally

                     Tel: +86-531-88771298

                      Shandong Xingke Intelligent Technology Co., Ltd.

                    ADD:4th Floor, No. 786 Xinluo Street, Gaoxin Zone,Jinan,Shandong,China.

                    Post code: 250101

                    Website: :810/

                                  http://sdxk.en.china.cn/