XK-LYJU1W MODERN SMART HOME TRAINING PLATFORM

XK-LYJU1W MODERN SMART HOME TRAINING PLATFORM

Picture for reference, computer is not standard configuration

PRODUCT INTRODUCTION

XK-LYJU1W Modern smart home training platform, use RF wireless communication technology as core, integrate modern communication device and technology and connect with modern smart home system. This system provides a smart home control and management platform and students can implement fixed system device installation, remote monitoring and remote control function by themselves. Most of the system composed parts are modular design, in addition to whole system training, also can carry out many independent home device training: surrounding protective device’s(window magnetic, infrared detector, emergency button etc.)organizing and withdrawing the defense from this locality to remote place. Simulation home device’s(such as: electric cooker, air conditioner, water heater)control from this locality to remote place, this locality lamplight scene setting, etc.

TECHNICAL PARAMETER

1).Training equipment power supply: single-phase AC 220±10% V, three-wire access, capacity<1KW, table-board bipolar open with over-current protection, leakage protection, specification IΔn≤30mA,≤0.1S. also equipped with DC12V power supply

2)Training panel adopts: mesh board+ PCB board, woodiness table-board with insulated pad and shell ground protection, have main power supply, experiment power supply indication, security features meet relevant national standard.

3) Size: long*wide*height=1200*7001450mm

4) Smart terminal

Digital video intercom, home wireless intelligent control

Anti-theft alarming, alarming linkage, shooting the alarming pictures

Information browse, community service, online shopping

Appliance lamplight control, scene control, timing control, temperature control and associated control

Multiplex home monitoring and multiplex remote video monitoring

Family video calls, extended WIFI to surf the internet, digital photo album MP3, MP4 play.

350MHz CPU, 64M SDRAM memory, 64M (Nand Flash) FLASH, external storage MMC card, store video and audio file

6 ten thousand color TFT 7 inch LCD, resolution ratio 800*480, resistance touch screen, color CCD camera, 420 wire

Network: 10/100M Ethernet, WIFI wireless(need to be extended), USB OTG interface, 3 ways video input, RS485, RS232; power supply: DC12V;power: <10W

5) Telephone remote controller

Can independently carry out remote control, remote setting and this locality setting function

Combined with smart switch, socket and infrared wire transponder to control, no need to transmit by gateway

Can control indoor RF control instructions and IR control instructions device

Lamplight control: can operate according to prompt voice, lamplight control instructions’ learning is same as control steps

Air conditioner control: can operate according to prompt voice, the air conditioner control instructions can be operated in system setting.

Button operation: when the system is in remote control state, if the user want to carry out emergency calling operation, then can interrupt remote operations by pressing button and connect with this locality telephone

Low voltage test: when the telephone remote controller has low battery, if the user picks up the locality telephone, system will give a low battery prompt, to prompt change the battery as soon as possible

6) Double button smart light regulating switch

Working voltage: AC220V / 50Hz

Rated load: 200W

Load type: resistance load

Receiving sensitivity: -100dbm

Working environment: temperature0~50℃

Humidity: ≤90%RH

Installation mode: single fire control mode, standard 86 box installation

Applicable lamp: filament lamp, spotlight

Function characteristics: can adjust light, and memorize the light effect, scene control

Power: 220W for each way

7) Information appliances remote controller

Working voltage: 2.2-3.5V (2 sections AAA alkaline battery)

Working temperature: 0℃~50℃

Environment humidity: ≤90%RH

Standby current: <15μA (3V)

Remote control distance: straight line distance is not less than 15m

RF sending frequency: 433.92Mhz

RF sending power: -3dBm

8) Universal embedded type smart socket

Maximum load power: 2200w

Receiving sensitivity:-105dbm

Receiving frequency: 433.92MHZ

Voltage: AC180~250V

TRAINING ITEMS

1) Smart home device understanding training

2) Smart terminal application

3) Home safety defense system building and application

4) Information appliances controller understanding and use

5) Training of computer remote control appliances

6) The understanding and use of telephone remote controller

7) Training of telephone remote control appliances

8) Lamplight scene this locality and remote control training

9) Safety defense alarming and lamplight linkage training

10) Telephone organizing and withdrawing defense training

11) Telephone remote alarming training

12) Smart home system comprehensive application