differential pressure gauge with diaphragm seal

differential pressure gauge with diaphragm seal
Corrugated cardboard boxes outer and foam paper inner

differential pressure gauge with diaphragm seal

Application of differential pressure gauge with diaphragm seal :
For high accuracy-graranteed within 2% of full scale. indicate low air or non-corrosive gas pressures –eighter positive, negative(vacuum)of differential. The design resists shock ,vibration and over-pressures no Manometer fluid to evaporate,  freeze or cause toxic or leveling problems, it’s inexpensive too .

Specifications of differential pressure gauge with diaphragm seal :
Model No.: DPG2000
Name: Differential pressure gauge
Gauge Size: 4"dia. x 2-3/16"deep.
Accuracy:  ±2% of Full scale ( ± 3% on 0,-100Pa,-125Pa,100mm and ± 4% on -00,-60pa,-6mm ranges)
Range available: -20 inHg to 15 psig, (-0.677 bar to 1.034 bar)
Over pressure : Relief Plug opens at approximately 25psig(1.72bar) standard gauges only
Temperature Limits: 20- 140 °F(-6.67 to 60°C)
Mounting Orientation: Diaphragm in vertical position , cousult factory for other position .
Process connection : 1/8”NPT ,dupliate high and low pressure taps –one pair side and one pair back .
Standard Gauge accessories: include two 1/8”male NPT plugs for duplicate pressure taps, two 1/8”male NPT pipe thread to Rubber tubing adapters, and three flush mounting adapters with screws.