LED module control card

Specifications

LED module control card

LED screen control software instructions

Thank you for using LED screen control software,The control

software is a professional LED LED control system supporting software, the software for the green software installation-free version, copied to the specified position can use!

When in use, double-click the software to open it!

Color study science and technology display control card operation basic consistent, here in the case of the EASY-30operation description.

A: control card connected steps

Click to run software, first start will open automatically when the" search interface display"         If there is no connection control card, will appear as follows the prompt:

If several automatic lookup failed, please check the serial line is" crossover cable", do not plug the well, control card is normal.

Note: the forbidden in the energized state of inserting the serial line, please turn off the power supply, then plug line.

If the hardware is connected correctly, the Toolbar" search screen" function, the software will automatically find the control card, and the software main interface display control card type and version number

Screen parameter setup steps:

The first step: click on the"1screen", then click on the right side of the main interface" screen parameter settings".

The second step : input the password"168" click ok.

Third step: in accordance with the specific parameters of screen display parameter setting.

Note that, in the process of setting up if it is found that the" white line" please immediately turns off the display power source, or may burn out screen pipe line.

Fourth step: the conventional display parameter configuration

1, if it is outdoor P10 single red screen, interface12interface:

                   Screen parameter: data polarity: low

                            OE polarity: high

                            Scan mode:1/ 4 scan, default 4.1scan mode

2, if it is outdoor P16screen, interface12interface:

                   Screen parameter: data polarity: low

                           OE polarity: high

                             Scan mode:1/ 4 scan in the 4.3scan mode

3,If indoor Phi 3.75, Phi 5screen, interface08interface:

                   Screen parameter: data polarity: low

                             OE polarity: low

Scan mode:1/ 16 scan

Color type: select to display screen color, monochrome or color.

Adjust parameters, click" Settings", click" OK" to the.  

Step fifth: click the" Settings" button, the display parameters set. The display can display the current information"".

The following can undertake a program of editing and management work.

The sixth step: partition card set:

                If the current card for partition card, click the partition into the set of partition screen:

Can be adjusted by a red box on the button to adjust the size of the partition. Supports up to3 partitions

Two: Editor

Software during normal operation of the interface as shown in Figure 6, mainly by the" program"," property"," Edit"," Preview" is composed of four parts.

2.1program settings

Through the menu " file"," save" or" save as" to save the settings, display information!

Different programs, the preservation of different document, to facilitate future restoration!

Through the menu" file" -" open" function, the program content for recovery.

2.2types of program

In the control software program area on the left side, can add program there are five types: as shown in figure .

1). The program, in hypertext RTF file in the program, the RTF hypertext to each character set word

Volume, size, different colors, and can maintain separate the program hypertext document, for later recovery use. You can enter a Windows systems support all languages ( such as Arabic, Korean, etc.) of each word in the text can be individually set the color, size, font. The text and picture

2). Time program, analog clock, digital clock.

3). The countdown show, the maximum period of 9999 days

4). The picture type program, support BMP, JPEG and other image formats.

5). Table grid program, supports spreadsheets.

6). Dynamic painting programs, support for GIF format.

7). The temperature and humidity program, temperature and humidity function support

Article8). This program, to support the input simplified, traditional Chinese, English and other fonts.

9). - audio programs, support synchronous speech broadcast and display screen. 16 *16,24 *24 dot matrix font.

2.3hypertext program parameter

In the hypertext support any language, any font, any size text program. Can be set up and modify the font, text size.

Hypertext program: can also set the following attribute column of conventional project

A: font.

B: paging mode : two page:

Level paging: a screen with only one line of display

Vertical paging: a screen can display multiple lines

2.4support poetic couplet display mode.

Open the caption editing display content into the" font" setting, in the font parameters choice" @ Chinese style", with" @" characters can be. " Shape"," size" is selected, click ok.

The 2.5pictures show parameters

With a picture, the software will automatically processing. Click the" read" button to input image files, support for BMP, JPEG format images.

The 2.6 clock program parameter:

Click add a page program settings

Display mode three:

School function: is the control card display time and computer time synchronization. For the current control card time parameter settings, click on the" school" button, as shown, can make the control card and computer time synchronization.

The 2.7 text program

Click the text editing area on the left" open" and "save" button can be transferred to the file ( TXT or RTF ), or to edit zone in the edited text is saved to a file.

The 2.8countdown, with timing

Countdown shows: if the target time is greater than the current time, countdown;

Shun timing program: if the target time to the current time, then with time.

The largest digital display, can be set to 9999999,99,9.

Three: Show Preview

Program editing is complete, can in the preview window previews the current editing program display case : the program editor window or attributes below has a program preview, and display control bar, as shown in figure:

Click on the button to preview and display the current editing programs each screen display case!    

Four: program data transmitter

Program edit and preview after confirmation, need to be edited program list is sent to the screen control card.

1, confirm the computer and screen body communication connection is correct.

2, click on the Toolbar" full" or click" Edit - send the current screen all show", the current of all shows are sent to the control card!

Five: Program Management

5.1new programs

Objective: to clear the current screen body of the old program, the new program data.

Methods and procedures: click on the" file" menu bar" - new".

5.2export program

Objective: to derive the edited screen data to the current program files ( *. LCM ).

Methods and steps:

1, click the menu bar of the" file" -" save as"," save".

2, in the pop-up "export to playbill file" dialog box select export position, and enter the program name, you can!

Objective: to introduce previously edited program data

Methods and procedures: click the menu bar" file" –"Import".

Part six: Note

Judging the screen for setting parameters are correct

If the screen is the normal word around, instructions to set up properly, without modification, please skip this step. Such as

Because walking characters are garbled, or incomplete, please click on the" screen set interface set."!

Note: the advanced settings only experienced people, if you do not display setting experience, please don't try to change, chaos.

Note: in the process of setting up if it is found that the" white line" please immediately turns off the display power source, or may burn out screen pipe line.

By observing the display content, if the normal display of the current content, all normal.

If the display on the first line is particularly bright brightness, other normal, please modify the" OE polarity".

If the displayed content on the display screen is anti-white, namely the word is black, is surrounded by bright, please adjust" data polarity".

If the display on the display of the content completely normal, please make sure your screen is what interface mode.

Control card with 08interface and a 12 interface, select and display interface application interface.

If you answer is outdoor, semi-outdoor module, these modules are generally12 interface, please" scanning" setting interface to select the correct scanning mode.

If the sending command prompt" command send failed: error parameter, do not exceed the maximum range," said you set

Count exceeds the control card allows maximum points. The EASY-30 control card as an example, the card supports a maximum of 64* 1024screen, if set to 64* 1048, is unable to support. In addition, if using the two-color mode, control range will be halved.