Best Selling HF 0.5-60mhz Vector Impedance Antenna Analyzer KVE60C for Walkie Talkie Antenna

  Best Selling HF 0.5-60mhz Vector Impedance Antenna Analyzer  KVE60C for Walkie Talkie Antenna

Specifications:

Details:  

1. Display: Sharp Transflective TFT, 1600 million colors

( Indoor and outdoor display even under the sun is extremely excellent , the price is very expensive. Mainland and Taiwan No stock of this technology to 65K color-based )

2. VSWR range of 1.00 - 99.99

( Market instruments million below the rank , no one can achieve such targets and precision )

3. 0.5-60MHz frequency range

4. Frequency stability : <5PPM

Stability ( bridge signal source is the most basic measure to ensure the accuracy and reliability of using LC oscillator architecture MFJ-269, Comet CAA-500 and other talent, do not catch the Rockets , their data can only be do a rough orientation analysis )

5.Frequency Step: Minimum 100Hz / step

( No one to do the same talent , this measurement resolution , which is very meaningful for narrowband antenna measurements , such as small loop antenna )

6. output level :. 5dbm

( characteristic parameters based 14MHz test )

( Meet regulatory requirements in most areas )

7. Sweep width : 300K/600K/1.2M/2.4M/6M/12M/24M/48M

8. scanning stepper : 1KHz/2KHz/4KHz/8KHz/20KHz/40KHz/80KHz/160KHz

9 . Impedance resistor reactance range 0.1- 999.9 ohms

(60C of the reference resistor bridge is used : 0.1% 10PPM the accuracy and stability ;

reference capacitor used is : 1 % accuracy million or less similar products , configure the maximum)

10. Power supply :. 3.7V 1800mAH lithium polymer ( standard built-in)

(60C power management solutions , is extremely efficient. Combined battery to force users to use a few months before intermittent reports often need to be recharged . )

11. rechargeable power :Micro USB standard connector

( must ensure that the output voltage is DC 5.0-5.5V, and the current output capacity > 500mA)

( Extremely convenient, without reprovision charger , basically applies to 99% of the market using the interface smart phone charger )

12. Charge Indicator : hidden

( non- charging state can not see )

There are three indicate status :

1 , charging ( red ) 2 , charging is completed ( green ) 3 , charging fault ( flashing )

  Best Selling HF 0.5-60mhz Vector Impedance Antenna Analyzer  KVE60C for Walkie Talkie Antenna