304 stainless steel flange

Stainless steel flange

Main effect

1. 1.      Connect the line and keep the sealing performance of the pipeline
2. 2.      To facilitate the replacement of a section of the pipeline
3. 3.      Easy to open and check the pipeline situation
4. 4.      To facilitate the closure of a certain section of the pipeline

normal sort

Specifications:1/2″~80″(DN10-DN5000)

pressure rating:0.25Mpa ~250Mpa(150Lb ~2500Lb)

Common standard

Chinese Industrial Standards:GB9112-88(GB9113·1-88~GB9123·36-88)

American Standard:ANSI B16.5 ,ANSI 16.47 Class150,300,600,900,1500(TH,LJ,SW)

Japan standard:JIS 5K,10K,16K,20K(PL,SO,BL)

German standard:DIN2527,2543,2545,2566,2572,2573,2576,2631,2632,2633,2634,2638(PL,SO,WN,BL,TH)

Italy standard:UNI2276,2277,2278,6083,6084,6088,6089,2299,2280,2281,2282,2283(PL,SO,WN,BL,TH)

British Standard:BS4504,4506

Flange connection type

slip-on-welding plate flange

hubbed clip-on-welding flange

Butt welding neck flange

socket welding flange

threaded flange

blind flange

Welding neck flanges with ring

Welding-on collar loose flange

Ring groove face flange and flange cover

Large diameter flat flange

Large diameter and high neck flange

Eight blind

Loose flange ring butt welding

Surfacing / welding flange

PN Meaning

PN is the nominal pressure, Represents the unit in the international system of units is 0.1MPa, In the engineering unit system is kgf/cm2.

The determination of nominal pressure is not only based on the maximum working pressure, According to the maximum operating temperature and material characteristics, And not just to meet the nominal pressure is greater than the working pressure. Flange also has a parameter is DN, DN is a parameter that indicates the size of the flange.

Use matters needing attention

1. 1.      In order to prevent eye corrosion due to the flange heating, Welding current should not be too large, Less than 20% carbon steel welding rod, Arc should not be too long, Interlayer cooling, Narrow welding bead.
2. 2.      Keep dry when used in welding rod, The titanium calcium type should be dried for 1 hours by 150℃, Low a hydrogen type should be dried for 1 hours by 200-250℃, Prevent the covering of viscous oil and other dirt, In order to avoid the increase of carbon content and the quality of the welding parts.
3. 3.      Welding of stainless steel flange pipe fittings, Repeated heating of precipitated carbide, Reducing the corrosion resistance and mechanical properties.
4. 4.      Chromium stainless steel pipe flange after welding of large flange American Standard hardening, Prone to crack. If the same type of chromium stainless steel welding rod (G202, G207) welding, Must be more than 300℃ degrees above the preheating and welding of about 700℃ degrees after the cooling treatment, If the welding parts can not be carried out after welding heat treatment, Stainless steel flange and pipe fittings (A107, A207) should be used.
5. 5.      Stainless steel flange, In order to improve the corrosion resistance and welding, the appropriate amount of stability elements Ti, Nb, Mo, etc. Welding is better than the chromium stainless steel flange. When using the same type of chromium stainless steel flange (G302, G307), Should be more than 200℃ degrees above the preheating and welding of about 800℃ degrees after the tempering treatment, If the welding parts can not be heat treatment, Stainless steel flange pipe (A107, A207) should be used.
6. 6.      Stainless steel flange pipe fittings, Welding electrode with good corrosion resistance and oxidation resistance, Widely used in chemical, fertilizer, oil, medical machinery manufacturing.

Material classification

Stainless steel is usually divided into 304, 304L, 316, 321, 316L,2205 etc

Other products we can supply as below: