laser MDF cut bed

1.Laser parts of laser MDF cut bed

Laser Parts:

1)      GSI metal Laser Tube 300W original

2)      GSI laser power source  

3)      PANASONIC JAPAN servo motor with Driver’s

4)      Servo control system (control card) Leetro 6535 DSP offline system

5)      Laser Head ( Au3Tech) (lens dia & Thickness) With Cooling Systems (Lens & Mirror are Air Cooling Mounted)

6)      Laser Head With Motorized & Auto Focusing System (Non-metal Sensing System)  

7)      Head Need Cover For Protection

8)      Air purge For Lens Cleaning

9)      Air cool facility is included for Mirror & Lens cleaning

10)  Red dot

11)  Laser Lens (Singapor Wavelength)

12)  Mirror (Singapor Wavelength) 

13)  Water Chiller System:- LW15

14)  Air ON / Off Automatically with Laser

3.CNC parts of laser MDF cut bed

1)      Die Board Machine Body :- Steel Fabricated Structure With Lath Bed with tempering heat treated (Machining & Grinding) Yes

2)      Machine Heavy Duty Structure: 1500 KG min

3)      XYZ Axis Square Guide & Block (Set) :- HIWIN (Made In Taiwan)

X Axis 20mm Y Axis 25mm

4)      X Axis Ball Screw :- No.2510 HIWIN (Made In Taiwan)

5)      Y Axis Ball Screw :- 32MM Hiwin (Made In Taiwan)

6)      Z Axis Ball Screw :- 80 MM max up &down distance Hiwin (Made In Taiwan)

7)      Limit Switch / Sensor :- Omron (Made In Japan)

8)      All Cables of Machine ECU (Made In USA)

9)      Electric Component (Power supply, Switch, Control Board) :- Schneider (Made In Germany)

10)  Cutting Speed: with 100% of 300W GSI base on 18mm die board cutting MAX 1200mm/min

11)  Total Cutting quality require perpendicular 90 degree: Accuracy( + /- 2 Degree)

12)Auto Lubrication Systems Requirement all part yes. For all ball screws and rails blocks, bearings.

13)  Compressor:- As Per Laser Cutting Required Capacity with Air Dryer 0% Moisture nil purpose3 phase AirCompressor   ( 3 KW power)

14)  Vacuum:- Blower 100% Fume Suck (Fume Collector Pipe is Metal pipe or plastic

15)  Bed Surface Accuracy: Machine Bed made by German CNC working station. Accuracy is 0.02mm To 0.05mm for guarantee mechanical accuracy.

16)  Optic alignments system with ruggedness otherwise Machine Can’t Cut The Thickness (One Time Alignments)

18) tool section aluminium blad (thickness 10mm) with distance between 20mm

Software:

1)      Laser Cutting Software:…leetro 6535

Cutting Cerf selection is automatically by Software During Single Drawings multi selection done automatic. ( Beam spot dia. Are define as PT1 = 0.45 mm, PT2 = 0.71mm , PT3 = 1.07mm ) ( existing system no facility Manually doing by defocusing for spot dia changing.)

2)      marking Is Compulsory Needy ( for company logo)

3)     Material types : Wooden = 18mm to 20mm , Acrylics = up to 40mm , Bakelite = 5 /8 / 12 mm.

4)     Software System should capable to keep store data in memory & recall Automatics.

5)     Auto Focus System For Z Axis (If Material is Not Bottom Side Than Soft Limit Protection) no material no work, Z Axis limit is must

6)     Trouble Shooting Error: system has automatic mistake protection interface

7)     Electrical Schematic Diagram ( Control Penal )

8)     Machine Operating Manual ( Trouble Shooting Manual )

9)     Alignment Picture shows in operating manual  

10) CE Certified Product

11)Supporting Format:   CF2, DXF, DWG, Coral Open CDR, EPS, PSD, PLT, Etc Files

12)Test Process: Nesting of different die (Rotation in steps of 90 degree linear movement.

 1)  Machine quality.If you plan to choose a so cheap machine,maybe the quality is bad.And you have to order another machine after you use it for a period.This situarion will have a bad effect on your producing.So the quality is most important foctors to choose a laser machine.

2)  Future more, the after-sales service is very important,too.Good after-sales service represent the image of a company.After you  use the machine and find some promblems of the machine, a good after-sale service can solve it effectively and protect the right of customers'.

3) The third is technical support. Because of time diffrent,there is a big problem to comunicate with the sellers. When you need help, maybe it is the sleeping time for your sellers. So effective contact and the good service is also important to you. Other sellers maybe can not do this, but our company can provid 24th service a day.

4) The last is company. A company with good reputation usually can produce good quality machine. As our company, we specialized in CNC laser machine more than 10 years, the professional engineer teams, the advanced equipment and the good after-sale service have earned us good reputation in world market.