self-powered remote control wireless socket approved by CE/ RoHS 70 meters long range wireless socket waterfproof socket

Remote control socket wireless socket power outlet

They are designed with the character of conciseness and compactness and can be used with lamps, fans, space heaters, and other electronic devices. You can turn off the devices by remote control. And there are many advantages as follows.

Advantages

1. no battery, no wire

2. work with radio frequency, 433MHz

3. easy to setup, intuitive and easy to use

4. stable performances

5. support remote wireless control

6.70 meters long range in the open area

7. products with top quality

8. 5 years of R&D experience of energy harvesting

9. plug it into any power outlet and make it instantly smarter

10 . shell with  flame-resistant material

It is more environment and easier without battery and wire, at the same time, it decreases the cost of wire and manual installation. Because there is no wire, you can use the transmitter anywhere as you like.

 If you want to stay in the warm bed instead of getting up to turn off the light, just use our wireless transmitters in your bedroom.

If your old parents are difficult in getting around to turn on or turn off electrical equipment, just use our wireless transmitters.

 And if you do not want to seek the switch in the dark, just use the transmitter near your hand.

Specification

Certifications: CE, RoHS

Learn Mode

1. Long press the learning button on the socket for 5 seconds, until the indicator light is off.
2. Then press the transmitter twice in 1 minute and you can see the indicator light is on. If not, please press the transmitter twice again.

Note: No operation in 1 minute or short press the transmitter once, the socket will exit Learn Mode

3 Connect a light with the socket and have a small test, short press the transmitter to see whether it can achieve remote control or not. If the light is one, then it succeed; if not, please check the plug or Learn Mode.

Note: Maximum of 3 transmitters can be learnt to a single socket.

Add additional sockets

Following the instructions of Learn Mode, pair each additional socket to the transmitter.

Note: there is no limitation to the number of sockets.

Pictures of remote control wireless socket