1.2mm and 1.6mm flux cored mig welding wire e71t-1

                                         1.2mm and 1.6mm flux cored mig welding wire e71t-1

aws 5.20 e71t-1 flux cored wire  is a kind of gas-shielded flux-cored welding wire for low-carbon steel and 490MPa high strength steel. And it is a kind of titania type CO2 gas-shielded flux-cored welding wire. Suitable for downhand welding and horizontal welding. It has high welding efficiency. The weld metal has been given toughening treatment by microelements, so it has excellent low temperature toughness, good crack-resistance and stable and reliable inherent quality.  

2.Type: Co2 gas shielded

3.iameter: 0.8mm,1.0mm,1.2mm,1.6mm

4.pplication:  Used for welding structures made of carbon steel and low-alloy structural steel with tensile strength higher than  or equal to 490MPa. Most widely used for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, boilers, petroleum machinery, chemical machinery, hoisting machinery, etc.   

Chemical Composition of Welding Wire(%):

Mechanical Properties of Deposited Mental: (shielding gas:CO2):

Recommended Current (DC+) and Voltage Range

Feature:

1.Excellent Welding Performance:

2.High fusion efficiency ; 

3.stable electric arc with good melting speed ; 

4.less welding splash , 

5.beautiful welding seam ; 

6.favorable wetness performance etc.

 5kg/ carton, 200cartons/ pallet, total 1000kgs/ pallet

15kg/ carton, 72 cartons / pallet, total 1080kgs/ pallet,

Spool type: D270/D300 plastic spool

250kg/drum,4 drums/pallet, total 1000kgs/ pallet

2.We have strict quality control system to make sure our goods will be same as your confirmed sample.

3.Packing as your request, with photo before shipment

4.Prompt shipment with professional documents

5.Good after sales service: with more than 20 years of experience, Any small problem happening will be solved at the most prompt time.

Yes, We are happy to provide free samples to you. But you need to pay for the express charges for the first cooperation. This charge will be deduct from official order

2. If OEM available?

Yes, as we usually do.

3. What are your company normal payment Terms?

We accept T/T (30% T/T prepaid before production, 70% T/T prepaid before shipment)

4. What are your company normal export terms?

We normally export with CFR, CIF and FOB.

5. How many days it will take you to produce mass production for us?

Normally it will take about 5-10 days. It also depends on the quantity and production seasons. 

Essen Welding&Cutting Fair:

CONTACT US: