Tattoo autoclave

Warranty:

Two-years warranty for whole machine
Lifetime warranty for chamber
Lifetime maintenance

Standard packing Q'ty (PCS)
Autoclave 1
Power cable 1
Water drain pipe 1
Tray 3
Tray holder 1
Handle for tray holder 1
Fuse 2
Instruction manual 1

The working condition of the autoclave:
* Relative humidity: ≤80%
* Atmospheric pressure: >70kPa;
* Voltage:230VAC, 50Hz, 2500VA
* The highest working pressure: 0.21~0.23MPa
* The highest working temperature: 134~137℃

The requirements of transportation and storage:
* Environmental temperature range: 5~40℃
* Relative humidity: ≤80%
* No corroding gases

Warning:

* Please use a 3-hole socket, and ensure the socket has been connected well with the ground. Do not put the autoclave on a place that the power are difficult to be cut off.
* Do not use power with different voltage with which stated in this manual.
* Do not touch the plug or socket with wet hands.
* Do not pull, change, over-bend or twist the wires, and do not put heavy things on the wires.
* Do not put the autoclave on an unstable table.
* Do not block the door of autoclave, and cover the ventilation holes and radiation holes.
* Do not put anything on the top of autoclave.
* If you find any abnormal smell or sound during operation, please cut off the power immediately and contact your local distributor or us.