semi auto corrugated paperboard laminator

The main electrical parameters

1. Air suction feeding is used for bottom paper. Automatic follow-up and continuous feeding is achieved according to the speed of top paper; paper feeding sheet by sheet by manual is not required.
2. Personalized design for top sheet, it is front fed, more convenient feeding, and faster laminating speed. 
3. Advanced elastic front register is used for location, high register precision, bottom paper will never exceed. When laminating, it is very easy to make top paper and bottom paper alignment, or top sheet exceeded. 
4. Fully automatic glue supply system: glue will be automatically supplied during lamination, and recovered, avoiding glue wasted.
5. Scientific design for linear speed of metering roller, avoiding glue thrown when high-speed running.
6. Imported touch screen is adopted, sententious, and visual.
7. The whole machine adopts PLC control system, compared with other time-delay device or middle relay control, the bottom paper is transferred more precise and stable, furthermore, speed is greatly increased, and circuit breakdown can automatically display and alarm.
8. Clean the lower roller in gluing section by blade with circulated water; complete cleaning, convenient to replace the blade 
9.Imported components are used in electrical section to ensure the machine run stably.
10. Floating movable pressing section is adopted to make the laminated paperboard smooth. This section can be moved front and back to take in paper conveniently.
11. Pressure of impression roller is one-side adjusted by nut of screw lead, convenient and fast. 
12. Gear reach is used to control the lift of water tray, which is easily taken out for cleaning.
13. The machine can work with laminating cardboard to A/B/C/D/E corrugated board, and bottom cardboard more than 350gsm to paperboard.