aluminium shearing machine,steel plate shearing machine

 Aluminium shearing machine,steel plate shearing machine

Main components deployment list

1. Hydraulic system               Italy Atos

2. Sealing pieces                   Japanese NOK

3. Oil pump                              Gear Pump

4. Electrical pieces                 Shanghai CHINT

5. Shear Blade                         Shanghai JINSHAN

6. Ballscrew backgauge        Taiwan HIWIN

7. Linear guide rail                  Taiwan Hiwin

8. Servo motor and Drive        Japan Yaskawa

9.Electonical components     Shneider

Overall Structure

Using UG (finite element) analysis, through computer aid design, with nice appearance.

The entire machine is fully steel welded structure, with excellent rigidity and stability.

Using German technology to eliminate internal stress.

Entire frame using striking grit to get rid of rust and spout anticorrosive paint.

Hydraulic system

Advanced hydraulic integrated system is employed and the pipeline connection is minimized, to ensure the system reliability and safety.

Pressure device: it is consisted of some pressure feed cylinders installed at support board in front of machine frame. Pressure head press down against the pull force of stress spring, press plate tightly. After finishing cutting, the cylinders are reset by the pull force of stress spring. The pressure is bigger as thicker as the thickness of plate.

Electrical control system

Electric components and material are accord with international standard, safety and reliable, long life.

The power of the machine is 60 Hz; 220V 3-phase electricity is 1-phase 36V. Control converter use 2-phase 220V.The out-put 36V of control converter control circuit and alight bulb. The voltage of magnetic exchange valve is 27V. The voltage of display bulb is 6V. And the other control component is 24V.

The control box is at the left. The all operation buttons fixed on button board at front except foot brake SF. The symbol of each function operation is displayed on above.

Delem DAC360 CNC Control System

Operater need to input the data of the sheet thickness,type of material, cutting length,retraction and the X-Axis Value,
Then the CNC will calculate the cutting angle, blade gap and cutting stroke Automatically.

-The DAC360 will Automatically adjust the following 6 functions
1) X-axis Backgauge- SERVO MOTOR Drive,BallScrew with liner rail
2) Blade Gap Adjustment
3) Variable angle adjustment-1º-3º
4) Cutting Length control
5) Stroke Counter
6) Retraction

Back gauge

The backgauge position was controlled by CNC controller DAC360 through servo motor.

DAC360 CNC control and Ballscrew Backgauge