Foam Adhesive,curing Bonding for Filter(bonding of Filter Paper)

Specifications

Two-component room temperature curing filter ponent proporation ratio is 8:1 

Usage:

1. The surface of end cap is supposed to be washed clean for getting rid of oil stain and dust, and dried completely. Any oil stain, water or other impurities should not exist on the surface, or the adhesive strength will be affected.

2. Before the charge mixture, material-A in the barrel should be stirred or inverted, material-A and material-B are mixed at the mixture ratio of 8:1 and stirred evenly.

3. Inject appropriate adhesive into the end cap and wait for a moment. The adhesive should be smeared evenly on every corner of cap surface.

4. Insert filter paper (or central tube) into the end cap and check the surfaces of two adhesive pieces. After complete contact, give a little pressure on the top of end cap and hold for a moment.

5. After curing for around four hours, reverse and adhere the other end cap. It can be packaged when complete drying after 24 hours and used after five days.

A material 30 KG(black plastic ),B material 3.75 KG (white plasyic)

Address:  Hebei Province Anping County, Hengshui City, Hebei Filter City

Anping sanlian filtering equipment Co.,LTD

 Welcome to take our sample to test ,if can satisfy your needs!!!