EverExceed broadband max range sealed battery with AGM separator BM-1226

The extremely powerful ,compact AGM VRLA batteries of EverExceed Broadband Max range are an ideal energy source for durability in Telecommunications and Electric Utility applications, the EverExceed top terminal Broadband Max Range provides high performance and reliability in long duration discharge applications. Our development team combines the market’s demand with design optimization, precision component selection and state-of-the –art manufacturing process to produce the most cost effective battery solution for today’s applications.

Applicable Operating temperature range:

-40℃(-40℉) to +70℃(+158℉)

Ideal Operating temperature range:

+15℃(+68℉) to +60℃(+140℉)

Storage time from a fully charged condition:

12 months at 20℃~25℃/68℉~77℉.

For each 9℃/15℉ rise, reduce the storage life time by half.

APPLICATION:

Broadband Max range batteries incorporate EverExceed’s advanced VRLA technology designed for long life and high performance in:

Broadband

Distributed Power /Communications /Railroad

Electric Utility

Switchgear Control Power /Cellular /Microwave

The EverExceed Broadband MAX range battery construction is as shown in the diagram below. The positive and negative grids are cast from a high tin lead alloy to reduce grid growth and corrosion. The active material is manufactured from high purity lead (99.9999%) to minimize the negative effects of impurities.

The EverExceed Broadband MAX range battery separator adopted is top quality mat of random woven acid resistant glass fiber, which acts as sponge-soaking up and immobilizing the electrolyte whilst maintaining good acid to plate contact and availability during discharge. “U wrapping” is employed to eliminate the risk of short circuits due to mossing and debris at the bottom of the cell.

The purpose of the separator is to maintain a constant distance between the positive and negative plates, thus removing the possibility of short circuits whilst allowing the active material to fully react with the electrolyte. The random weaving also results in an open structure, which offers minimal resistance to the folw of electrolyte during filling.

1. Plates: High tin lead alloy, optimized for high corrosion resistance.

2. Separator: Highly porous glass micro-fiber separator, optimized for low internal resistance. For maximum absorption of the electrolyte and for electrical separation.

3. Standard housing: Reinforced special high temperature resistant ABS container and cover adopted.

4. Terminals: Silver plated copper female insert for easy and safe assemble and maintenance free connection with excellent conductivity.

5. Valves: Release gas in case of excess pressure and protects the cell against atmosphere.

ELECTROLYTE FILLING – Special production and stringent QC systems are utilized to ensure the electrolyte saturation is optimized for each cell.

Measured high vacuum acid fill, reduces electrical variability between cells. The battery design and construction negates the need for electrolyte addition and the battery remains maintenance free throughout its design life.

SAFETY RELEASE VALVE – The battery will operate above atmosphere pressure under normal operating conditions, however the maximum pressure is governed by the safety one-way release valve. Open is activated by pressures in excess of approx. 2 PSI (14Kpa), resealing at approx. 1.2 PSI (8.4Kpa).

GAS RECOMBINATION – The gasses generated during normal operation of the battery are internally recombined. In fact more than 99% of the gas achieves recombination.

TERMINAL CONSTRUCTION – The contact quality between the insert terminal and the lead post is of vital importance during short duration/high amp dischargers.

Elevated terminal temperatures are the result of poor contact, eventually causing seal degradation and electrolyte leaks.

EverExceed’s design and assembly technique for terminal casting ensures trouble free operation for the design life of the battery.

• Thick optimized positive plate design for maximum service float life – 15 years design life @ 20℃ (68℉).
• Nano-Carbon enhanced for improved durability.
• UL Recognized component.
• Valve regulated lead acid battery (VRLA).
• Extreme temperature High-Compression Absorbed Glass Mat technology (AGM) for greater than 99% recombination efficiency.
• Proprietary Fixed Orifice Plate Pasting technology applying active materials on both sides of the grid for consistent cell-to-cell performance, higher density &capacity and uniform grid protection.
• Advanced deep cycle high tin lead alloy, reduces grid corrosion and promotes long battery life.
• Over-sized, through the partition inter-cell welds provide low resistance connections, with minimal power loss.
• Flame arresting, low pressure safety release venting system for individual cells, recognized per U.L. 924.
• Reinforced special high temperature resistant ABS container and cover adopted.
• One-way relief valve, Explosion Resistant.
• Full 3-year free replacement warranty even temperature up to +60℃, 5+ years warranty optional.
• Better performance for high /low outdoor applications, extended service life for non-temperature controlled outdoor enclosures.

EverExceed Group was established in 1980s and has its headquarter in Shenzhen, China, and subsidiaries in Singapore, UK and operations in six continents. We are manufacturing and supplying worldwide reliable power solutions with continuous innovative technologies, cost-effectiveness and good service, including industrial batteries (lead acid batteries, NiCad batteries, Lithium-ion batteries), solar power systems, UPS systems and DC power systems.

EverExceed attained the certificates of ISO9001 & ISO14001, and our products are accredited with TUV / VDE/ CE/ IEC/ UL/ RoHS/ DEKRA. Our advanced technology, professional technique, automatic equipment, experienced staff and strict operation system assure high level product quality. By now, reliable products with our brand “EverExceed” have been exported to more than 60 countries all over the world.

Warmly and sincerely welcome you to join us, and become a distributor and a partner in the future.

For more information, please visit our website:.