Wireless touch switch for automatic door PY-TS1

 Wireless touch switch for automatic door PY-TS1

Main Features:

Adopt uniformity frequency,high stability of wireless signal receiving and sending

Siludification of PU varnished shell,dapper appearance with anti-off screw

Operation frequency 315M,stability better than 10-5.

Panel pushing with low-power consumption,long service life battery.

Three point of trigger pressing design to ensure the effective action.

With large capacity output,available to be used with autodoor,electric lock and access controller

Door open within 2s when signal received.

Wide voltage input of AC/DC12-36V

Function switch with voice indicator,power indicator turns green to confirm the validity of operation

Techincal Parameters:

Supply Power(Wireless Receiver): AC/DC 12-36V

Quiescent Current: 15mA

Active Current: 80mA

Capacity of the main contact (wireless receiver): 10A 24VDC

Contact pull-in time(wireless receiver): 1-9s adjustable

Supply power(hand converters):4.5V

Emission current:3.9mA

Battery life: the average daily charge 500 times, the high quality battery can withstand 300 days

The distance of sending and receiving: according to the actual site electrical shielding environment, normal conditions up to 5 meters

Working environment temperature: -42°c~45°c

Working environment humidity: 10-90%RH

Appearance dimensions:  Hand converters: 203x41x18mm

                                         Wireless receiver: 120x50x32mm

Product Over View:

1.The indicator light to send (flashing red light when triggered dffective)

2.Poker press panal

3.Open the cover, set dial switch inside, and is allocated with wireless receivers, to send and receive effective.

4.The screws to prevent falls off and retain

5.Adjus trigger hold time

6.Matching dial(dial needs agree with the touch switch)

7.Status indicator light(An electric red light, green light to receive effective)

8.Input and output terminals.