E1 to 10(100)BaseT protocol Converter

Specifications

E1 to 10(100)BaseT protocol Converter

OFSP-ExFx The E1 to Ethernet protocol Converter is a device that extends Ethernet by means of telecommunication lines (E1 or E1 transport network, such as PDH, SDH, or microwave, etc.) and is also referred to "Net Bridge".It can effectively utilize free bandwidth of telecom operators' lines and can be used instantly once it is deployed, with little increased investment.

Technology Characteristics
 Transparent transmission of Ethernet data through E1 lines at 2048Kbps bandwidth
 Plug and play, without any setting or debugging work
Support automatic negotiation feature in Ethernet and full duplex/half duplex mode
 Support transmission of Jumbo Frames specified in IEEE 802.1Q and Ethernet switches with VLAN capability
 Local data frame filtering
 Provide unbalanced 75Ω and balanced 120Ω E1 interfaces

Typical Application:

 Interface Parameters
E1 Interface:
  Support ITU-T G.703
  HDB3 line coding, comply indication output of route warn
  Coding rate : 2048Kbps±50ppm
  75Ω physics interface use BNC standard coaxial connector, 120Ω physics interface use RJ45 connector
Ethernet Interface:
  Fully IEEE 802.3 (2000) compliant
  Bit rate: 10Mbps or 100Mbps
  Interface type: RJ45

General characteristics
 Power : 220V±20% , -36 ~ -72V
 Power Consumption : < 5W
 Environment Temperature : 0°C-50°C
 Size : 220×175×35mm or 483×160×45(mm) 
Net Weight : 900g

Packing List
 Protocol Converter
 One Power cord (Note : -48v no with power cord)
 Two BNCs Coaxial Connector
 Manual book

Order Informaintion