FOSC Dome type shrinkable seal

Dome Heat Shrinkable Splice Closure

General description:

Fiber Optic Splice Closure FOSC OFS-SCV-240F can be used in manhole, in handhole, aerial-hanger, wall-mounting, be directly buried and pedestal.

OFS-400-F Fiber Optic Splice Closure Datasheet

This closure is suitable for both single fiber,and ribbon fiber.

Max. fiber capacity:

OFS-400-F-1: 24 fiber per tray*9 pcs of splice trays=216 fiber

OFS-400-F-2: 24 fiber per tray*8 pcs of splice trays= 192 fiber

Installation flow chart

Notes:1. Please align the two arrow marks(closure base and dome).

Content of fiber optic splice closure

1.Velcro strip with one X flake

2.Clamp          

3.Dome          

4.Base          

5.Splice tray        

6.Tray lid          

7.Shield continuity wires

8.Valve              

9Shield continuity connector  

10.Sealing ring      

11.Inner fixing part  

12.Strength member  

13.Support ring on the base

Oval outlet cable seal kit:

1.Heat shrinkable sleeve  

2.Aluminum cable protection tapes        

3.Abrasive strip          

4.Branch off clip  

Cable seal kit:

1.Aluminum cable protection tape

2.Heat shrinkable sleeve

3.Abrasive strip

Other accessories:

1.Desiccant  

2.Shield continuity wires

3.Connector  

4.Smouvs (splicing protection tubing)    

5.transparent tubes

Tie wraps

Technical Parameter:

1. Working Temperature: -40 degrees centigrade~+70 degrees centigrade

2. Atmospheric Pressure: 70~150Kpa

3. Axial Tension: >2000N/1min

4. Stretching Resistance: 2500N/10 square centimetre(1min)

5. Insulation resistance: >2*104MΩ 

6. Voltage Strength: 15KV/1min, no arcover or breakdown

7. Pressure in the water: 50m/72hours

8. Splice tray with optical taking-in radius≥40mm. Low optical loss

Packing: (light goods)

4 sets in 1 outer carton

64 cm*52*56=0.19 m³

Weight :24.2 KG