100M 8 SFP Ethernet Switch with eight SFP ports

Specifications

OFS-SF8

100M 8 SFP Ethernet Switch with eight SFP ports

OFS Serier 8 ports 100M Ethernet Switch has eight 100M SFP sockets . Customer can choose different 100M SFP module according as his demand, such as Multimode or Singlemode, Single fiber or Dual fiber and Singlemode 20-100km etc. It is applicable to use in constructing of Optical Fiber Ethernet network.

Main features

     Provides 8 SFP sockets

    The SFP slot supports 100M at full duplex.

    Supports 802.3x flow control on full-duplex and Back-pressure flow control on half-duplex.

    Supports VLAN and QoS.

    Supports Trunking function.

    Support packet length up to 1600 Bytes

    Low power consume (10W), low heat, and good reliability.

    Store & forward, share memory, non-blocking architecture

Technical Specifications

     Standard compliance:IEEE802.3/u/z/ab, 1000Base-SX/LX.

    MAC address table: 8K

    Frame buffer memory:1MKb

     With 20 Gbps switch fabric

    Connector: SFP :1000Mbps;

    Cable:Multimode Fiber:50/125,62.5/125μm(the max distance up to 224/550m)

Singlemode Fiber:8/125,8.7/125,9/125μm(the max distance up to 10~100 km)

     Flow control:Full Duplex: IEEE802.3x flow control;

Half Duplex: back pressure flow control

    LED:PWR,SFP1 Link/Act, SFP2 Link/Act, SFP3 Link/Act, SFP4 Link/Act, SFP5 Link/Act, SFP6 Link/Act, SFP7 Link/Act, SFP8 Link/Act;

    Power Requirement: AC220V(100-240V),50~60Hz; DC:5V,3A

    Ambient Temperature::0 ~ +50°C;

    Storage Temperature::-20 ~ +70°C;

    Humidity:5% ~ 90%;

    Dimensions:30(high)×127(width)×210(length)mm;