Sand Environmental Simulation Chamber

                                           Sand  Environmental Simulation Chamber

    This product is applicable for the dust proof and resistant test of various auto components and parts including lamps, meters, electric dust proof sheath, steering system and lock etc.

Main Technical Parameter

Note: Chamber size can be customized according to customer request.

We have experience of producing and installing walk in dust chamber.

Test area and shelf

Test area is made from stainless-steel.

Standard load of shelf is 50kg (If need greater load, confirm in advance).

Chamber inside equipped with power interface for test specimen.

Normal width of a gap between wires is 75um.

Normal wire diameter is 50 um.

you can put test specimen on a stainless steel shelf, which is fixed above the sieve and funnel,

Control Panel

It is located on the right side of the test area.

5.7" programmable color touch display controller;                            

99 programs 99 sections;

R-232 interface;

PC Link with software

Vacuum system

There is a vacuum for some test specimens.

Bottom of dust chamber is fitted with vacuum pump, a pressure gauge,

air filter, pressure regulator, connecting tube.

The vacuum system is connect with pump, one side connect to test specimen.

Dust circulation

First,during test, the dust is blown in test area by air motor,

Sencong, fall in funnel, and re-cycle blowing pump to achieve dust circulation test.

Bottom of chamber is fitted with circulating pump, vacuum pump, motor.

  Three years Warranty ; Lifelong Service

Xi'an LIB Enviroment Simulation Industry

Add: No.5 Zhangba First St, Xi'an High-Teach Area, Shaanxi Provinces  P.R. China 710065

Tel: +86 (0)29 68918976

Fax: +86 (0)29 68918977

Skype: lib_melody