ADT-8940A1(4 axis ) motion control card with PCI bus CA

FOB Price

USD $1 - $699 / Piece

1 Piece(Min.Order)

Supply Ability 10000 Set / Sets per Month
Port Shenzhen
Payment TermsT/T Credit Card

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Place of Origin	Guangdong, China	Brand Name	ADTECH
Model Number	ADT-8940A1	Base Material	0.01mm
Copper Thickness	0.01mm	Board Thickness	0.01mm
Min. Hole Size	0.01mm	Min. Line Width	0.01mm
Min. Line Spacing	0.01mm	Surface Finishing	--

Product Description

PCI Bus Four-axis Motion Control Card ADT-8940A1 Applications:

Carving machine
Cutter
Laser carving
Laser cutting
Graphic plotter
Tapping machine
Dispensing machine
Welding machine
Drilling machine
Punch machine
Automatic detection of electronic fitting
Automatic detection of press
Cutting and welding of semiconductor
All kinds of NC cutting
Industrial robot
Measure of space coordinates
Biological and medical auto-sampling and processing equipment

PCI Bus four-axis motion control card ADT-8940 Feature:

1	32-bit PCI bus, PnP;
2	Pulse output mode: pulse + direction, pulse + pulse;
3	Maximum pulse output frequency is 2MHz;
4	Random 2-4 axes linear interpolation;
5	Constant velocity or trapezoid acceleration/deceleration;
6	4-axis servo/stepper motor control; each axis can control independently;
7	All the 4 axes have position(coder) feedback input; 32-bit counting; maximum frequency is 2MHz,maximum counting range: -2,147,483,648~+2,147,483,647;
8	Hardware termination emergency;
9	40-channel optical coupling isolation digital input, 16-channel digital output ,every axis contains 2 positive and negative limit signals;
10	Read the logical position, real position, driving speed, acceleration and driving state in real-time in the motion process;
11	Each axis has 2 STOP signals, which are used to search for home , deceleration and Z-phase of coder;
12	Each axis has 8 input signal,include 2 positive/negative limit signals,2 stop signals,1 servo in-position signal, 1 servo alarm signal and 1 general input signal. two limit signals can be used as general input signals by setting them as invalid;
13	Time delay, can set timelag time and get timelag state;
14	Receive signals from servo motor drive, e.g. coder Z-phase signal, in-position signal, alarm signal, etc;
15	Up to 16 motion cards can be used in one system,control 64 axes;
16	Support operating systems: DOS, WINDOWS95/98/NT/2000/XP, WINCE;

PCI Bus four-axis motion control card ADT-8940 Function:

Pulse output:	Mode of pulse output: 4-channel pulse outputs, pulse/direction, pulse/pulse, maximum output frequency: 2MHz, uses advanced technology to ensure the error of pulse output frequency is still within 0.1% even it is in high level.
Coder input:	Maximum input frequency: 2MHz Phase difference pulse input or up/down pulse input of 4 axes A/B phase;
Digital switch input:	40-channel optical coupling isolation input, every axis contains two positive and negative limit signals Input voltage: 5-24V Isolation voltage 2500VDC
Digital switch output:	16-channel open-collector output NPN open-collector, 5-24VDC, maximum current: 100m
Control mode:	Offer many kinds of control modes such as quantitative motion, back-to-home motion, 2-axis interpolation
Position management:	The position is managed by two UP/DN counters: one is logical position counter used for managing the output of inner drive pulse, and the other is actual position counter used for receiving the input of outer pulse. It is either A/B phase input signal of coder or grating scale, or input signal of up/down pulse. As actual position counter, its bits can reach 32 and the maximum range is -2,147,483,648~+2,147,483,647. The outer input can also be used as hand wheel input for common counting.
Speed control:	Constant velocity or trapezoid acceleration/deceleration
Scram input:	Supported hardware emergency termination, stop pulse output immediately
Development libraries and operating system:	Support DOS, WINDOWS XP/2000/NT/98/95 and WINCE operating system Support programming by developer such as C/BC++/VC/VB/C++Builder/Delphi/Labview/EVC Applications based on DOS and Windows

PCI Bus four-axis motion control card ADT-8940A1 Size: 160×107mm

Contact Us

ADTECH (Shenzhen) Technology Co., Ltd.: Contact nameFelix Gao
Chat Now; Phone86-755-26099116; Address5th Floor, Tianxia IC Industial Park, Yiyuan Road, Majialong, Nanshan District, Shenzhen, Guangdong, China, Shenzhen, Guangdong

*Email
Please enter Your valid email address.
*To

Felix Gao
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Brush Making Machine	Cnc Application Equipment	CNC Controller	CNC Spring Machine
Motion Controller	Multi-axis Motion Control Card	New Products	STEP Robots
Stepping/Servo Motor And Driver

ADT-8940A1(4 axis ) motion control card with PCI bus CA

You May Like

Product Details

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category