Feature:

• 32-bit PCI bus, PnP
• Pulse output mode: pulse + direction, pulse + pulse
• Maximum pulse output frequency is 4MHz
• 6-axis servo/stepper motor control, each axis can control independently
• 2-6 axis linear interpolation ,arc interpolation, multi-axis continuous interpolation
• Linear or S-curve acceleration/deceleration
• Asymmetric linear acceleration/deceleration
• All the 6 axes have position(coder) feedback input; 32-bit counting; maximum frequency is 4MHz, maximum counting range: -2,147,483,648~+2,147,483,647
• 48-channel optical coupling isolation digital input, 32-channel digital output ,every axis contains two positive and negative limit signals
• The speed and target position can be changed in real-time in the motion process
• Read the logical position, real position, driving speed, acceleration and driving state in real-time in the motion process
• Each axis has 3 STOP signals, which are used to search for home and Z-phase of coder
• Each axis has two 32-bit compare registers, which can be used for software limit
• Each axis has 8 input signal, include 2 positive/negative limit signals,3 stop signals,1 servo in-position signal, 1 servo alarm signal and 1 general input signal. Except 2 limit signals, other 6 signals can be used as general input signals by setting them as invalid.
• Position counter is integrated with variable cyclic function;
• the logical position counter and actual position counter are 32-bit up/down cyclic counters
• Receive signals from servo motor drive, e.g. coder Z-phase signal, in-position signal, alarm signal, etc
• Up to 16 motion cards can be used in one system, control 96 axis
• Support operating systems: DOS, WINDOWS95/98/NT/2000/XP, WINCE
• Support developing software with C, VC++, VB, BC++, C++builder, LabVIEW and Delphi.

Function:

• 32-bit PCI bus, PnP
• Pulse output mode: pulse + direction, pulse + pulse
• Maximum pulse output frequency is 4MHz
• 6-axis servo/stepper motor control, each axis can control independently
• 2-6 axis linear interpolation ,arc interpolation, multi-axis continuous interpolation
• Linear or S-curve acceleration/deceleration
• Asymmetric linear acceleration/deceleration
• All the 6 axes have position(coder) feedback input; 32-bit counting; maximum frequency is 4MHz, maximum counting range: -2,147,483,648~+2,147,483,647
• 48-channel optical coupling isolation digital input, 32-channel digital output ,every axis contains two positive and negative limit signals
• The speed and target position can be changed in real-time in the motion process
• Read the logical position, real position, driving speed, acceleration and driving state in real-time in the motion process
• Each axis has 3 STOP signals, which are used to search for home and Z-phase of coder
• Each axis has two 32-bit compare registers, which can be used for software limit
• Each axis has 8 input signal, include 2 positive/negative limit signals,3 stop signals,1 servo in-position signal, 1 servo alarm signal and 1 general input signal. Except 2 limit signals, other 6 signals can be used as general input signals by setting them as invalid.
• Position counter is integrated with variable cyclic function;
• the logical position counter and actual position counter are 32-bit up/down cyclic counters
• Receive signals from servo motor drive, e.g. coder Z-phase signal, in-position signal, alarm signal, etc
• Up to 16 motion cards can be used in one system, control 96 axis
• Support operating systems: DOS, WINDOWS95/98/NT/2000/XP, WINCE
• Support developing software with C, VC++, VB, BC++, C++builder, LabVIEW and Delphi.

Parameter:

Accessories:

• Graphic plotter
• Tapping machine
• Dispensing machine
• Welding machine
• Drilling machine
• Punch machine
• Automatic detection of electronic fitting
• Automatic detection of press
• Cutting and welding of semiconductor
• All kinds of NC cutting
• Industrial robot
• Measure of space coordinates
• Biological and medical auto-sampling and processing equipment

Size:

• Size:153×107 mm

  Wiring