Real factory wholesale AC hid car light 35w 55w 75w

Specifications

Real factory wholesale AC hid car light 12v 24v , 35w 55w 75w ,3000k 4300k 5000k 6000k 8000k 10000k 12000k 3000k

  HID xenon headlight specifications

       1. universal used,98% of cars

      2. Using the high heat and pressure resistance silica gel wire,Soft, durable, fire prevention, anti-   corrosion, anti-jamming

     3  .Convenience of installation,No need to change the original parts of the car,Just Plug And Play

     4. High efficiency, long lifespan, and low defect

     5.  waterproof,Shockproof and dustproof tes,low/high voltage protection,short circuit protection

     6.  energy saving

     7  .Intelligent digital circuits,heat dissipation design, Start time is short,not dazzle

  HID xenon kit products show 

HID xenon kit production workshop

HID kit packaging and Delivery

XENON HID KIT INSTALLATION INSTRUCTIONS

1.      Open the hood and take off the headlight housing. If there is enough space for installation, there is no need to remove the headlight housing.

2.      Remove your existing halogen bulbs from the vehicle (refer to your vehicle's owner's manual for instructions) and Install and secure the HID Xenon Bulbs in their place.

3.      Assemble brackets on to the ballasts and mount the Ballasts under the hood near the headlight reflector.

4.      Connect all the plugs from the ballast to the bulb as shown on the diagrams.

5.      If you have a Bi-Xenon kit, connect the grounds to the car body and connect the power wire to the positive terminal of the battery.

6.      Connect the lights to the vehicles factory headlight socket. Ensure that you get the polarity correct. HID lights do not work with reversed polarity.

7.      Tie all cables in place. Make sure no moving object or heat producing object is near them.

8.      Test your lights to make sure that they are working correctly.

9.      Enjoy your new HID lights.