Fume Extraction System for Welding

Specifications

 Welding fume  Purifiers :

1. It is equipped with built-in centralized PLC controlling system. The operation panel is clear and simple, very easy to operate.

2. Pulsing back-flushing automatic dust-removal system: The filter core is the automatic rotating and back-flushing type, which keeps the filter core surface clean when working, to insure the stable blowing rate; The air compressor parts are connected with high pressure rubber pipe with high pressure air-inflow in the bottom, which insure the facility always in good working condition.

3. The filter core is imported from the large company in America with long useful life. It can arrest the 0.3μm particles. The filtering effect is good for all kinds of particles including the wet particles.

4. It is equipped with the all-directions sucking arm of 360 degree rotating. It can suck the fume exactly from the source which make best of the fume collection efficiency, and insure the workers’ health in the largest extent.

5. It is equipped with three layer filter system to avoid the damage effect of flame and large slag particles, which extend the useful life, more safe and more reliable.

6. The clean air is exhausted uniformly and diffusely through the gridiron outlet, so it can minimize the noise.

7. It is attached with all-direction caster wheels, which makes the facility movable freely and easy to position.

8. Photoelectric controlled on/off, energy saving and high efficiency. The hood has the lighting device which is upon customer’s choice.

9. The parts working condition are all stable and has long useful life, meantime easy to be replaced.